Detailed origami step-by-step diagram of the GG rose, including the completion of the flower and the stamens. Finally, insert the stamens into the middle of the flower. The beautiful GG rose is completed. Friends, give it a try~
1. Fold the square paper diagonally.
2. Turn, turn the top corner back and the bottom corner up.
3. Expand the bottom corners.
4. Turn the bottom corner up.
5. Do the same for the remaining three corners.
6. Rotate the paper.
7. Turn the bottom edge up to the position as shown in the picture.
8. Press and stretch the bottom finger position.
9. Fold the right bottom corner diagonally.
10. Restore and fold inwards.
11. Expand as shown.
12. Rotate the paper.
13. Fold the bottom edge.
14. Partially crimp the bottom.
15. After expansion, rotate as shown in the figure.
16. Fold the remaining three edges the same.
17. The final style.
18. Turn the bottom corner of the paper upward.
19. The bottom edge is partially flattened.
20. After expansion, it is as shown in the figure.
21. Flip the paper model.
22. Fold the bottom edge upward as shown in the picture.
23. Leave a crease in the middle.
24. The remaining 3 corresponding positions are operated in the same way.
25. Fold the bottom edge upward as shown in the picture.
26. Flatten the right side.
27.As shown in the figure.
28. Fold the bottom right corner as shown in the picture.
29. Form the crease as shown in the picture.
30. Turn over.
31. Fold the bottom right corner diagonally.
32. Restore.
33. Turn over the paper model and look at this corner.
34. Fold this corner as shown in the picture.
35. Then flip it up again.
36. Form the crease as shown in the picture.
37. After completion, it is as shown in the picture.
38. Turn the origami model over.
39. Fold a square shape in the middle to a crease connected to the edge crease, as shown in the picture.
40. What you see now should be as shown in the picture. You can refer to the comparison picture in step 37.
41. Fold the remaining three corresponding positions in the same way.
42. Then proceed to gather according to the previous pre-crease.
43. Since the folds have already been made, this origami model is easy to assemble.
44. Assist polymerization with hands.
45. Continue aggregation.
46. Turn it over.
47.Look at the side of the origami rose.
48. Fold as shown.
49. Form such valley marks.
50. Then fold it in.
51. Fold it up.
52. The thumb is also folded inwards.
53. Fold it upward.
54. The remaining three corresponding structures are also folded in the same way.
55. Flip the paper rose.
56. Fold the raised edges inwards.
57. Don’t be together anymore.
58. Turn it over.
59. Adjust the peripheral structure at this time.
60. Fold it into an everted shape as shown in the picture.
61. The structure wrapped inside is also turned outwards.
62. What you see here is the origami rose with its edges turned outwards.
63. It can be further reshaped.
64. Make the petals look more natural.
65. Cut out the paper strips as shown in the picture.
66. Fold it in half.
67. Fold the long side in half.
68. Then fold the edge to make a small edge.
69. Keep rolling up.
70. Roll as shown in the picture.
71.After rolling up.
72.As shown in the figure.
73. Place it in the middle of the origami rose.
74. The completed origami rose.
