The novel coronavirus pneumonia epidemic has been going on for a long time. During the break, I could occasionally go fishing and relax, but with the development of the epidemic, the situation has become more and more serious. In order to respond to the governments call and for the health of myself and my family, I decided to temporarily put down the fishing rod and stay at home. Come on!
In order to pass the time, I recently did everything from carpenters and blacksmiths to painters and fitters at home, and I did a lot of tinkering. s things.
Now I will share some of the results with you.
1. Shiyou brand sea pole stand.
Materials:
1. A piece of waste solid wood flooring (I used the "Shiyou" brand. Why use the Shiyou brand? Because it is easier to make famous brands When it comes to catching fish, it’s easy for the no-name ones to fly. Haha) 2. Saw blade. 3. AB glue, self-operating screws.
Step method:
1. Saw the floor into the following shape.
2. Choose the right one according to your own needs distance, use a drill to drill holes on it. If you don't have a drill, you can also use a saw to cut the gap.
It should be noted here that the distance between adjacent poles cannot be too small, otherwise the poles will easily fight with each other.
3. Sand and trim, then it is basically formed.
Pay attention to the red circle in the picture below. It turns out that I used solid wood. Due to the texture of the wood itself, the "Kuaika" will break as soon as it is inserted into the hole, so the best way is to install it separately, tighten it with self-tapping screws, and then fix it with AB glue.
< p align="center">
Finally plug in the simple bait tray and you're done.
Through the trial, I feel veryEasy to use, easy to carry, and good stability.
2. Big Mouth Monkey Brand Bleach Bucket
Materials:
1. Big Mouth Monkey 4 buckets of popcorn. 2. AB glue, 502 glue.
Step method:
This step method is relatively simple. Cut off the ends of the plastic buckets and connect them with glue.
First apply it once with 502 glue, and then reinforce it with AB glue to ensure it is firm and watertight.
< img data-action="zoom" alt="Prevent pneumonia, organize equipment, and become a DIY master" src="https://img.111diy.com/timthumb.php?src=/d/file/fujian/75d8ef8d339e7eb37335acb94b94f4e6.jpeg" />
Take a look, does the metal frame look better than the one you bought? Are you more advanced?
The overall length is 70 cm, even rogues can deal with it.
< p>
3. Good Fishing Brand Fishhook Storage Box.
Materials:
1. Good Fishing< a href="https://www.111diy.com/chuangyi/baozhuang/" target="_blank" class="infotextkey">Packaging A rod and bucket. 2. Glue.
Step method:
Choose the appropriate length of the rod barrel, and use a saw blade or utility knife to dig out a small part from one side of the rod barrel.
Be careful not to dig more than half of the rod barrel, otherwise the bottle containing the fishhook will easily fall off.
Use glue to glue the plugs of the rod barrel on both sides.
The bottle bought from a certain treasure is labeled.
Some fishing friends may say: Isn’t there a ready-made tool box? Through practice, the tool box I bought was not very airtight, the hooks would skew, and it was not so intuitive to find the fishhook.
Finally, let’s take a group photo. . .
After using it, I feel that there are still many areas that need improvement, and I would also like to ask all fishing friends for your advice.
