In other words: the cold wave has been constant in recent times, and the weather has been a "roller coaster" with wind and rain, sometimes cloudy and sometimes rainy, sometimes strong winds. Suitable for fishing. I basically tend to fish slowly and steadily. As the saying goes: The fun of fishing comes from different realms and different tastes. Today, let’s not talk about fish, but let’s talk about ways to recycle and reuse small accessories.
In the process of fishing, some accidents will inevitably happen. For example: the sub-line is wrapped around the figure-eight ring or the floating seat is broken, or other reasons cause damage to the line group and injuries, etc. Throw it away, its a pity again. Recycling but don’t know how to reuse it? After all, we are all working-class people and we must pay attention to the virtue of diligence and thrift. So how to adapt the application again? Today I am about to tie up the main line, and by the way, I would like to share two tips with the novices. One is: Useless floating seats or damaged floating seats can be used as anti-entanglement beans. The second is: the secondary utilization method of space beans. I hope all the novice fishing friends like it.
Often during the fishing process, the floating seats will be broken and the useless floating seats given by the merchants at the time of purchase will be caused. seat. It would be a bit sad to throw it away, but it would be useless to keep it. How to deal with it? This is how I deal with it: just change the way it is used. Use these floating seats to convert them into anti-tangle beans. Some floating seats are made of silicone or high-quality rubber, and it is really the right thing to change them to anti-tangle beans. How to make:
1. Cut the floating seat in proportion (as shown below) and divide it into two parts. Note: Be sure to cut evenly when cutting.
2. After all the other accessories are put on step by step in the online group, hold the original saddle head and put it on Thread the main thread through the cut end.
3. Then connect the main line and the figure-eight ring. Then slowly smooth down the cut floating seat until it fits into the ring of the top figure eight ring. Then cut off the excess main thread ends on the figure-eight ring, and its done (see picture 3 below). The entire line group configuration is completed (Figure 4).
< img data-action="zoom" alt="DIY practical anti-tangle beans for damaged floating seats, and the secondary use method of space beans" src="https://img.111diy.com/timthumb.php?src=/d/file/fujian/a71c598e19b97e9eda34954fb301551f. jpeg" />
Of course, fishing friends must ask: silicone float Yes, will the rubber ones be heavier or thicker? The answer is that there is no hindrance. Because the weight of the accessories configured in the line group must be trimmed to adjust the balance during the semi-water drift adjustment. Ensure the water line The role of verticality and protrusion sensitivity. To put it bluntly, it is nothing more than the amount of lead sheared. So, don’t worry. On the other hand, the float seats I switched to are all given when I buy fishing lines online. Just imagine the free Things that are either too big or too small are useless.
Often when the main lines are accidentally damaged and scrapped. We all You must try to recycle the small accessories on the line set in time and never waste them. As the saying goes: "Don't worry about small things." Throw away some today and some tomorrow, and you can save a lot of money in a few years. Not to mention everything It is reusable. To be honest: when cutting the thread, I even recycle the other fishhook. I just made a small magnet and put it on the fishhookIn the packaging bag. Back to the topic. How to recycle and recycle as follows:
1. Do not throw away the used Space Bean base plate. Keep it. Continue to thread the space bean. If the main thread is scrapped, leave the two ends of the space bean and the floating seat accessories appropriately longer.
2. Thread the remaining thread on the space bean into the wire hole , wrap the thread end around two rolls and insert it into the bottom thread hole to tighten (Picture 2, Picture 3).
3. Then return the transition space bean to the space bean steel wire. Then use a toothpick to open the steel wire hole. In the future, you can take out the beans normally when making large wires.
4. There is also a real connection transition method. That is: tie the new line and the old line into a figure-eight knot and then transition the space beans, floating seats, and lead pendants. The premise is: it is best to tweeze the accessories on the scrapped main line Together, the transition is convenient. Otherwise, you have to tie a figure-eight knot in two parts and then transition the space beans.
Finally: the above two methods are what I commonly use. The fundamental purpose is: to save costs , Reduce the pollution of fishing grounds. Therefore, those who should save money should adopt the concept and attitude of diligence and frugality. This also reflects a kind of good moral character and quality of people. I hope this post will be helpful to all fishing friends! Be virtuous Zifu!
Happy New Year to all the fishing friends!
Happy New Year to all the platform staff!
