Cute bird-style sweater chain pendant, using wire windingJewelry is made using the following methods. This bird pendant with simple lines is suitable for beginners to learn wire-wrapped jewelry.
Making materials: round copper wire (1mm and 0.3mm thick), 10mm diameter aquamarine perforated ball, round hammer and anvil, round nose jewelry pliers , wire cutters, sandpaper
Production steps:
Step 1: Making the bird Before making the pendant, first design and draw the winding production sketch
Step 2: Use round nose jewelry pliers to bend the 1mm thick copper wire port into Small hoop
Step 3: Place the ring on the anvil and use a round hammer to flatten the edge of the ring
Step 4: Use the ring as the necklace ring of the bird pendant, and then bend the copper wire into the birds head according to the sketch design
Step 5: Bend into the mouth of a bird at the front of the head
Step 6: Adjust the angle of the beak and use pliers to twist the beak 90 degrees
Step 7: Place the twisted beak copper wire ring on the anvil and use a round hammer to beat it flat
Step 8: Bend the copper wire behind the birds beak into the birds abdomen according to the design sketch
Step 9: When bending to the tail, press the sketch Bend the copper wire into a natural transition into the wings of a bird
