Remove the corrugated paper from the waste carton and DIY a very practical laptop cooling rack for summer~ It is environmentally friendly, saves money, and looks good. You deserve it. What you need to prepare: corrugated cardboard, utility knife, super glue.
Dimensional drawings of each piece of cardboard required.
Cut the cardboard according to the template size.
In order to increase the bearing capacity of the entire bracket, 6 angled supports were placed cardboard.
At the bottom of the supporting cardboard, open a 6mm wide (cardboard thickness) fixing slot 5cm from the rear.
Put the bracket together first and see if there is any discrepancy.
Use pins to fix the appearance. If there is no problem, start pasting.
First paste the cardboard with longitudinal support at the bottom and 5cm at the rear.
Mark the positioning line.
Partial view of the marked positioning line.
Install the angled support plate according to the marked positioning line.
Sturdy support plate has good installation effect.
Install the upper back Cardboard.
< /p>
Here is a front installation picture.
Front cardboard installation.
An environmentally friendly computer cooling bracket is DIY completed.
