Halloween is coming, make a little spider with glowing eyes! As long as it crawls on its territory, it will become full of momentum. Hanging it on the wall will make it feel like Halloween!
Material tools:
- Light emitting diodes,
- Scissors,
-Chalk,
- black clay,
- Conductive thread,
- needle,
-Grey/Black Felt,
- CR2032 battery,
- Battery holder (optional),
- Hot glue gun.
Use chalk to draw a spider web on gray felt. Eight lines intersect each other, and lines are drawn between each to form an octagon.
Carefully cut the outer edges.
Then fold the spider web in half and start cutting out the inside.
Cut felt spider web.
Prepare conductive thread and needle.
Put threads on the spider web.
Make a spider out of black clay and make eye sockets for the LED bulbs.
We will connect in parallel to the LED bulbs.
The long side of the LED bulb is the positive pole, and the short side is the negative pole.
Align the poles so that one end is connected to the battery and the other end is touching the ground plate.
Then connect the conductive wire to the unconnected part of the battery and test by touching the LED poles.
If the light comes on, connect the conductive thread to the spider web.
Try to put the spider on the web.
The Halloween decoration with glowing eyes is finished. It’s much taller than jack-o’-lanterns, bats and the like~
