Tools and materials required:
Beeswax 0.6, engraving pen set, 2000 sandpaper, glasses cloth, a necklace, two small pliers, and an engraving pen
Step diagram:
Step 1:
A scrap to be thrown away, simply with nothing to do.
Step 2:
I didn’t think about the above picture, so I didn’t take any photos or weigh the scrap material.
Step 3:
It was already like this when it appeared again. I originally just wanted to get familiar with the machine, but the more I grinded it, the more I thought about it, and something came out of it, and it came out, looking like an animal tooth?
Step 4:
Step 5:
Add sandpaper and polish.
Step 6:
Polish with 2000-grit sandpaper. This step is done by hand. I want it to look a bit rustic, so I don’t polish it too brightly.
Step 7:
Two hours later, I can only weigh myself now. About 0.2 grams were removed by grinding
Step 8:
The customer just put this necklace on the bar after trying it on, and it was her.
Step 9:
Is it an unexpected surprise, or is it already destined?
Step 10:
Step 11:
Step 12:
Which one looks better with a metal triangle or one without metal
Step 13:
Which one looks better with a metal triangle or one without metal