Tutorial on DIY fashion necklace with plastic straws. It is a very creative handmade jewelry making. It is a good DIY for the little beauties at home. The materials are also quite easy to prepare. For specific DIY methods, please refer to the graphic tutorial below.
Materials:
10 plastic straws, 1 box of toothpicks
1 can of gold spray paint, 1 roll of black nylon rope
4 copper hexagonal nuts, 1 foam board
Tools required:
1 pair of scissors
Production steps:
Step 1:
Materials: straws, glue, toothpicks, scissors, don’t forget!
Step 2:
Use a straw to cut out 30 sections of tubing, each section is about 4~5cm long
Step 3:
Insert the toothpicks one by one on the foam board, and then insert the cut plastic tube on the toothpicks.
Step 4:
Come. Take one lying down. Cut two 1m long nylon ropes, as shown in the picture above, and pass them through a plastic pipe at the same time.
Step 5:
Put the second plastic pipe side by side with the first plastic pipe, and then pass the upper and lower ends of the nylon rope on the left hand side through the second plastic pipe.
Step 6:
By analogy, thread all 30 plastic tubes on the nylon rope. There is no need to thread them too densely. Leave a certain distance between each plastic tube.
Step 7:
After threading the plastic tube, tie knots at both ends of the necklace. The knots should be larger than the diameter of the nut holes. Then thread two nuts on both ends, tie a knot, and secure the nuts.
Step 8:
Finished product!
Step 9:
Real beast!
