Exquisite Beijing Temple of Heaven Paper Model Making

Making a paper model of the Temple of Heaven, I wonder if you dare to try it. We have seen some renderings of the paper model of the Temple of Heaven before. The effect of the production of the Temple of Heaven itself is not particularly good, mainly because of the It depends on the fineness of the paper-membrane drawings. If the fineness of your paper model drawings is relatively high, the Pingtan model you make will look better, but it will involve a lot of production steps or parts. , of course, the difficulty of production will also increase. For example, the tutorial for making the model of the Temple of Heaven we see here, the drawings involved are very complicated. Of course, the style of the final paper model of the Temple of Heaven is indeed very beautiful.

Step 1:

The paper model still needs to be printed in high definition

Step 2:

The assembly drawing should be studied carefully

Chapter Step 3:

The assembly of each paper model needs to be planned in advance

Step 4:

It is relatively easy to assemble this kind of large paper model

Step 5 ：

Assembly diagram of the steps of the Temple of Heaven paper model

Step 6:

It is best to arrange the positions of each part in order before assembly

Step 7:

If you have better cardboard and a printer, you can print the paper model drawings yourself

Step 8:

There are quite a lot of drawings for the Temple of Heaven paper model

Step 9 ：

< p>You can use a utility knife when cutting out some details on the drawing

Step 10:

Very small parts require special attention

Step 11:

Temple of Heaven paper model There are many details inside

Step 12:

If the printer’s drawings of these paper models are not clear, the effect will be greatly affected

Step 13:

Paper model printing drawings of the Temple of Heaven

Step 14:

The drawings of these paper models are best Printed in order

Step 15:

When cutting drawings, especially round paper model parts, you need smooth scissors

Step 16:

Continue to come Cut the Temple of Heaven paper model

Step 17:

There are quite a lot of small parts

Step 18:

The large paper model parts are still enjoyable

Step 19:

These thin strips require very careful cutting

Step 20:

We have arrived at the door part of the Temple of Heaven paper model

Step 21:

p>

Doors and pillars of the Temple of Heaven paper model

< p>Step 22:

If you have never been to the Temple of Heaven, you can also have a good understanding of the structure of the Temple of Heaven through this paper model

Step 23:

Let’s continue with the parts of the Temple of Heaven paper model

Step 24:

The round part

Step 25:

The brick structure of the paper model of the Temple of Heaven

Step 26:

The paper model of the Temple of Heaven contains There are many brick structures

Step 27:

The drawings of the Temple of Heaven paper model are relatively not particularly complicated

Step 28:

The parts here need to be trimmed

p>

No. 29 steps:

This part still needs attention

Step 30:

Another direction of the paper model

Step 31:

A very large paper model

Step 32:

The advantage of printing your own paper model is that if it gets damaged, you can make a new one and cut it again

Step 33:

Large round paper model structure

Step 34:

< /p>

Don’t forget another circular paper model structure

Step 35:

Okay, the last drawing of the Temple of Heaven paper model. The production of paper models of the Temple of Heaven is basically the same as the production of traditional paper models, that is, from the perspective of production methods and production thinking, they are basically similar. If you need to complete the production of this Temple of Heaven model, you can follow the illustrated tutorial of this Temple of Heaven model, which explains in detail how different paper model structures are spliced ??together.