Simple DIY steps for paper airplane model toys

Today I will teach you a relatively simple foldingpaper airplane model , is a folding method of average difficulty. I believe everyone can do it well. Let’s try it together~ Most aircraft models can passOrigami is shown in the form of origami. Some methods are relatively simple, while others are more complicated, but for those who love origami, it is definitely not a problem. Please see the steps below for details.

All you need to prepare is a square piece of colored paper, and then just wash your hands~

1. As shown in the picture above, fold it into a 'meter' shape, then fold both sides to the middle and make creases, as shown in Figure 3.

2. Follow the blue mark in Figure 3 above and fold it inward to form the shape in Figure 1 below.

3. Point the four corners upward, then select two opposite corners and press in the same direction, as shown in Figure 2.

4. Then fold the two sides downward from the position marked by the blue line in the middle to form the shape shown in Figure 3 above.

5. At the position marked in blue in Figure 3, move this corner to the left and turn it down (Follow the blue crease and turn it inside out).

6. After turning it over, it will look like the style in Figure 1 above. At the position marked by the blue line, fold the wings on both sides upward along the blue line (the position of the blue line here is where it is connected in the middle, slightly upward The next point will do).

7. After folding it up, fold it flat according to the position marked by the blue line in Figure 2. This position is also the middle position.

8. After both sides are folded, it will look like Figure 3 above. Although the red line marked in the above picture is somewhat unclear, it is at the top of the tilted triangle on the left. Fold off a small corner, and then fold it to both sides. middle.

9. Fold it in and it will look like Figure 1 above. Fold the exposed triangle in according to the place marked by the red line, so that it will look like Figure 2 above. In this way, a paper airplane model is ready.

Everyone must have done it, right? For those who haven’t done it yet, please leave me a message if you have any questions~