You don’t need double-sided tape for this kind of rose. If you don’t have double-sided tape on hand, you can move the pasting point to the original place and put it in in step 36 of the tutorial. The original layer is pasted in the middle. There are two interlayers in total, and the innermost one is the place to be pasted.
Learn to make paper flowers with me
1. Materials: a square piece of colored paper, double-sided tape
2. Fold in half
3. Expand in another direction
5. Expand
Rose A complete collection of folding methods: windmill roseOrigami tutorial
6. Fold in half diagonally
Windmill rose origami tutorial
7. Expand in another direction and continue folding in half along the diagonal
Windmill rose origami tutorial
8. Get the cross crease, and then fold the sharp corners to the center intersection
9. The remaining three corners are folded towards the central intersection
Windmill rose origami tutorial
Windmill rose origami tutorial
10. Expand the square. Fold the upper and lower edges in half towards the midline
Windmill rose origami tutorial
11. When you see two intersecting lines, fold one side along the drawn line
Windmill rose origami tutorial
12. Press toward the center line of the dotted line
Learn to make paper flowers with me
Learn to make paper flowers with me
13. The lower edge is also compacted toward the dotted line (middle line)
Learn to make paper flowers with me
Learn to make paper flowers with me
14. Flatten the bulging side toward the middle
Learn to make paper flowers with me
15. The other side is also along the drawn line, fold the upper and lower edges toward the middle dotted line
Learn to make paper flowers with me
16. Flatten the sides toward the middle
17. Rotate the direction and become like this
18. Turn over the top
19. Fold the right side of the lower half downward to form a windmill, which is a big windmill
20. Fold the inward side of the windmill back in half
21. Compaction
22. Push the side up
23. Fold in half and compact to the end
24. Turn up the edge of the third side and compact the sharp corner on the right
25. Compact the edges
(Demonstration)
26. Turn up the fourth side and fold it back
27. This step is a bit difficult. The step is to expand the first edge toward the midline
28. Push the fold line of the previous sheet (where the index finger of your right hand is now) to the fourth side
29. Compact after pushing
30. Now you see a shape similar to a photo frame (it’s almost half done here). The double-sided tape is very important, and the paper is also very important. It can’t be too soft
31. Now focus on the place where the dotted line is drawn. You cannot see the dotted line at this step
32. Fold the dotted line and leave a gap between it and the second edge, not too big
33. Fold the second edge upward along the gap, and fold the sharp corners of each side to deepen the square fold line in the center.
34. Since you said you can't wait, I'll skip the details (in short, the following steps are the same as 32 and 33 by folding the remaining three sides) 32 and 33 33 Two steps, make other triangles in the same way.
35. Attach a small piece of double-sided tape to the tips of the four corners
36. Tear off the double-sided tape on one side and open the middle of the sharp corner of the other side. You don’t need to double-sided., put a sandwich inside the four sharp corners
37. Align the sharp corner with double-sided tape to the turning point of the other sharp corner
To put it simply, just stick it on the second side, and then don’t expose the first sharp corner
38. Pinch tightly
39. Next, open the middle of the second side as well
40. Stick the sharp corners
41. Same for the third side (activate fast forward mode)
42. The fourth side will be a little more difficult to open, but it will still open in the middle
43. Stuff it in like this
44. In the same way, you are all here, but you are not finished yet
45. (Please pay attention to the close-up part, do you know the key point?) It is the triangle inside
46. Open both sides and fold the triangle up
47. The black line is the original crease, press the crease against the triangle
48. The second side is also opened and you can see the triangle inside
49. Fold the triangle
50. Press it like this (shot in reverse, so tiring)
51. Do the same for the remaining two triangles (fast forward mode) to get four corners, and put a mezzanine inside the four sharp corners so that they will not fall apart.
52.Pinch the sharp corners
53. Turn backward
54. All the way down
55. The sharp corners at the end should also be turned over
56. The second side, the sharp corner is turned backward
57. Turn over the second side
Put a sandwich inside the sharp corner. You don’t need glue. Just put a sandwich inside.
58. The third side (if you fast forward, you can’t stop at all)
The third side is now
59. Let me show you the back
60. Of course this is the last picture, call it a day
