Rose flowers are full of romantic atmosphere. Seeing them and smelling them will make you enchanted. Red roses are as passionate as fire, pink roses are as delicate as a girl, and yellow roses are warm and comfortable. Roses of different colors represent different meanings, so you need to think carefully when giving them to others. So, have such beautiful roses attracted you? Next, let’s learn how to make paper roses.
1. First take out a square piece of paper and start making this QT origami rose.
2. Fold the paper in half on the upper and lower sides. After folding in half, unfold the origami model. At this time, we will see a horizontal crease in the middle of the paper.
3. Then fold the bottom edge of the origami model forward to form the middle crease.
4. Then fold the top edge toward the middle crease. The origami model formed after completing this should be as shown in the picture.
5. After unfolding all the previous ones, you will see the three creases as shown in the picture.
6. At this time, fold the bottom structure of the origami model toward the top crease of the origami model, that is, fold it as shown in the picture.
7. After completing the folding, unfold the origami model, leaving a crease between the two lower creases, which is the crease pattern as shown in the picture.
8. Then rotate the paper 180 degrees and fold it in the same way as step 6, also with the bottom edge facing the origami mold.Fold the top crease of the shape.
9. After unfolding the origami model, the creases on the resulting origami drawing should be as shown in the picture.
10. At this time, rotate the origami model ninety degrees and perform the same folding as in steps one to nine. At this time, unfold the origami model so that the resulting origami model should be as shown in the picture.
11. Fold the upper right corner of the origami model to the lower left corner. This is a diagonal fold. After completing this, flatten the origami model.
12. The origami diagram and creases obtained after opening the origami model should be as shown in the picture.
13. The other diagonal line is also folded and displayed as shown in the picture.
14. At this time, fold the four corners of the origami model according to the diagonal lines of the small square in the origami illustration.
15. Then fold the origami model diagonally along the peak marks in the illustration.
16. After completing the folding, rotate the origami model to the forward direction, that is, the origami style as shown in the picture.
17. At this time, draw a red crease on the origami diagram.
17B. Fold the bottom structure of the origami model upward. The folded crease is the crease pattern drawn in the previous step.
18. After completing the folding, you should have an origami style as shown in the picture.
18B. If the origami model is unfolded at this time, the origami icon we should see is as shown in the picture.
19. At this time, unfold the origami model, and the resulting origami illustration should be as shown in the picture.
20. Repeat the folding operation in step 17 at this step.
21. Then repeat the folding operation of step 18 here.
22. Then repeat the operation of step 19. The origami model obtained at this time should be as shown in the picture. That is, such a criss-cross folding structure appears in the middle of the origami model.
23. At this time, fold one edge of the origami model, and fold the edge structure inwards to make a bulge. After the folding is completed, it should look like the picture shown.
24. Rotate the origami model clockwise and perform the same folding operation as in step 23.
25. Then fold the other corner in the same way as step 24.
27. After all folding corners are folded, flatten and fold the horizontal and vertical raised structures in the middle of the origami model counterclockwise as shown in the picture.
29. After completing the twenty-eight steps of folding, a convex structure will be formed in the middle of the entire origami model. At this time, use your fingers to pull apart the flat folds in the four directions to get a bulging structure. Small package structure.
30. At this time, use your fingers to flatten the small package structure to form a small square origami structure in the middle of the origami model.
31. Rotate the origami model 45 degrees. The origami model you see at this time should be as shown in the picture.
32. Then flip the origami model over, and the resulting origami style should be as shown in the picture. At this time, the paper is divided into four areas. At the same time, in the same way as the origami diagram, the X-axis and -y-axis structures are imaginary drawn.
33. Move the -y axis to the x-axis. If the folding is correct, the folds marked in the origami diagram will be obtained by restoring the origami model. The red ones are valley marks, and the blue ones are peak marks.
34. From this origami diagram, you can see the valley marks and peak marks formed after the previous folding step.
35. Use two fingers to fold the edge of the -y axis to the right.
36. The two edges marked in the origami diagram need to be folded together.
37. At this step, the two edges are finally folded together, forming the origami style as shown in the picture.
38. The origami model you see here is actually the same as the origami model in the previous step.The shape is the same, just flip the origami model to see the structure from the bottom.
39. Follow the folding operations from steps 33 to 38, and perform the same on the remaining mirror corresponding structures. After all the folding is completed, the origami model should look like the picture below.
40. At this time, the bottom structure of the origami model should be as shown in the picture. A unique rotating structure can be seen.
41. After turning the origami model over, use your hands to bring the origami model together to form a unique wheel-shaped origami structure as shown in the picture.
42. At this time, turn the origami model over, and we can see the origami cylindrical structure as shown in the picture.
43. Fold and round the edge structure of the origami model at this time, making it look like an origami rose structure.
44. Then turn the origami model over and gently press it inward with your fingers. The main purpose of pressing is to make it flat.
45. Place the origami model on the desktop. The origami style you see at this time should be as shown in the picture.
46. Then flip the origami model over, and you will see that the origami model has four edge structures surrounding it.
47. After flipping the origami model over, unfold one of the edge structures to form such a unique inverted trapezoidal structure. Make a valley mark at the place marked by the red dotted line.
48. Then fold the left side of the ladder structure toward the inside of the origami model, that is, fold according to the black arrow.
49. After completing the folding, the origami model you see should have a clear style as shown in the picture.
50. Fold the remaining three edge structures in the same way as steps 47 to 49.
51. At this time, if you look at the origami model from the top, you should see the origami style as shown in the picture.
52. Turn the origami model over, and the origami model you see should be as shown in the picture.
53. Then fold the triangular structure on the right side of the crease to the left according to the position marked on the crease.
54. After completing the folding, the origami model you should get is the origami style as shown in the picture.
55. Fold and restore the previous valley marks. At this time, proceed according to the newly marked peak marks and valley marks in the origami diagram.fold.
56. After completing the folding, a unique origami structure style that is concave inward is formed.
57. At this time, fold the triangular structure under the red dotted crease structure in the origami diagram upward according to the marked crease.
58. Then fold downward according to the red dotted valley mark in the origami diagram at this time, and then restore the fold.
59.At this time, two new creases are marked on the origami model. The blue ones are peak marks and the red ones are valley marks. Fold the red valley mark structure downward and form a blue peak mark structure.
60. After completing the previous folding arrangements, the resulting origami model should have a unique origami structure that is concave inward as shown in the picture.
61. Repeat the folding operations from steps 53 to 60 on the remaining three corners of the origami model.
62. At this time, turn the origami model over and the origami model style you see should be as shown in the picture.
63. Then fold the edge structure of the origami model inwardly. The inward folding structure is marked in the origami diagram in the form of blue valley marks.
64. After completing the folding, the origami model we see should be an inward-folded structure as shown in the picture.
65. After the front folding is completed, the origami model should look as shown in the picture when viewed from the top.
66. Rotate the origami model ninety degrees counterclockwise, then repeat step 65 and pull out this small edge origami structure.
67. After completing the sixty-six steps of folding, the origami model style seen from the top should be as shown in the picture.
68. At this time, rotate the origami model 90 degrees counterclockwise and repeat the folding operations from steps 65 to 67.
69. Rotate the origami model ninety degrees counterclockwise and fold it in the same manner as steps 65 to 67. The same is done by pulling out a small edge structure.
70. The origami model you see now should be as shown in the picture. Note that at this time, the different overlapping triangular structures are pinned inside the adjacent bag-like structures.
71. After turning the origami model over at this time, the origami model we see should be as shown in the picture.
72. Viewed from the side, the origami model of this origami rose should look like this:The style shown in the figure.
73. Insert your fingers inward from the middle part of the origami model, and then carefully open it.
74. With the continuous assistance of your fingers, use your fingers to form a unique rotating hole-like structure, making many paper roses
75. The origami model style seen from the top should be as shown in the picture.
76. At this time, looking at the style of this origami rose from the side, some basic origami rose styles have begun to appear.
77. We need to use tweezers at this time, because we need to perform a plastic surgery on the origami rose to make it look more beautiful and real.
Adjustments are done in a similar way.
78. The specific way to shape origami rose petals is to use tweezers to curl and fold the petals of the origami rose.
79. The hand-made origami QT origami rose is finally completed. If you find it very complicated, don’t be discouraged. Once you master it, it’s yours.
