A real-life tutorial for making an origami wine glass and rose from A4 printed paper. Just look at the CP picture, so the steps below will be much shorter. Friends who have a certain foundation and like the unique beauty of wine glass roses, just follow and learn~
This is a cp picture. Use A4 printing paper and then copy it on colored paper.
The CP is made on the colored paper and cut out a square as shown in the picture.
Follow the line marks as shown in the picture, and then fold as shown in the picture.
Here comes the key point. This is the V point which is more important and more difficult. Just fold it a few times and become familiar with it. Fold out the 12V as shown
The rendering after folding.
As shown in the picture after folding the 3V shape on one side.
Use a small awl to roll it into shape (you can use water pen refills instead) to form a curvature as shown in the picture. After completion, do the same for the other three sides.
The finished rendering, with all the creases formed.
Turn over to the reverse side, hold the tweezers in your right hand counterclockwise, and hold the paper in your left hand clockwise, as shown below.
After completion, turn to the front as shown. Next we need to gather the paper. We are very close to success~
After the gathering is completed, the bottom is as shown in the picture. Fold all the creases at the bottom according to the line marks in step 2.
Smooth out all the creases that should be in the picture and it will be ok.
Fold the bottom as shown in the picture.
The front is as shown in the picture, but it has not been reshaped.
The last one, after plastic surgery, it’s actually pretty good, it’s finally finished~
