The paper rose origami with a very beautiful flower shape adopts a slightly different folding method from the traditional Kawasaki rose origami. The petal pattern presented has its own unique charm, which is very textured and has a three-dimensional effect~
1. Fold the top and bottom edges in half.
2. Fold the left and right sides in half.
3. Fold the upper and lower sides in half toward the middle horizontal crease.
4. Fold the left and right sides in half toward the middle vertical crease.
5. Continue to fold the paper into eight parts horizontally.
6. Continue to fold the paper into eight parts vertically.
7. The crease diagram as shown in the picture after completion.
8. Then make a diagonal fold.
9. Make another diagonal fold.
10. Fold the two valley marks along the diagonal line.
11. At this time, you need to fold the valley marks and peak marks according to the origami diagram.
12. After completion, you will get the beautiful three-dimensional configuration as shown in the picture. Fold the upright edges on the diagonal counterclockwise.
13. At this point, you will get the origami model style as shown in the picture. You can see some small bumps in the middle.
14. At this time, pull the middle structure to both sides as shown in the picture.
15. Constantly adjust during the pulling process.
16. Until here, you can see that a relatively large stretched structure has been formed in the middle.
17. Finally, it is completely unfolded. Careful operation can prevent the paper from being torn.
18. Then flatten it with your fingers.
19. Flip the paper model.
20. At this point, you can see that the back is as shown in the picture.
21. Fold according to the crease as shown in the figure.
22. Start folding as shown above.
23. Continue.
24. The style after completing the folding. Rotate the origami model 90 degrees.
25. Fold the crease as in steps 21-24.
26. After folding, rotate 90 degrees.
27. Fold the crease as in steps 21-24.
28. Complete the folding and rotate the origami model 90Spend.
29. Fold the crease as in steps 21-24.
30. The style after completing the folding. At this time, grab the position indicated by the red circle in the origami diagram with your hand.
31. After pulling it up, fold the bottom triangle.
32. After the folding is completed, it should be as shown in the picture.
33. Pull the lower right corner to the right.
34. At this time, bring the two faces together as shown in the origami diagram.
35. Then fold the triangle where the right hand is located inward.
36. Pull down the structure on the right.
37. At this point, the folding operation will be performed according to the creases in the origami diagram.
38. After completing the folding, rotate it 90 degrees.
39. Now repeat steps 30-38 in the lower right corner.
The origami model style after repeating steps 40.30-38. Rotate the origami model 90 degrees.
41. At this time, repeat steps 30-38 in the lower right corner.
42. Style after completing the repetition. Then rotate the origami model 90 degrees.
43. Continue to repeat steps 30-38.
44. The style after completing the repetition.
45. Push the four petal structures of the origami rose inwards.
46. Continue to push inward based on the previous push.
47. Keep pushing.
48. The origami model style after pushing. Rotate the origami model 45 degrees.
49. Then rotate it 90 degrees as shown in the picture.
50. Fold the lower triangle upward.
51. Next, you need to put the two faces 1 and 2 together.
52. Fold as shown.
53. Rotate 90 degrees as shown in the picture.
54. Fold the lower triangle upward.
55. Repeat steps 50-54, then rotate and fold.
56. Repeat steps 50-54 and continue to rotate and fold.
< /p>
57. Rotate the origami model 90 degrees as shown in the picture.
58. After rotating, you can see the style as shown in the picture. Fold the edges as shown in the picture.
59. The left edge is similarly folded.
60. Fold the upper edge in the same way.
61.Pinch the corner marked by the red circle in the origami diagram.
62. Pinch and fold as shown.
63. Insert into other seals.
64. This completes such a folding operation.
65. After flipping the paper model, you will see the style as shown in the picture.
66. At this time, start adjusting the first origami rose petal.
67. Rotate 90 degrees as shown in the picture and continue adjusting.
68. After the adjustment is completed, rotate it 90 degrees.
69. After the adjustment is completed, turn the origami model over.
70. Fold the structure on the right side of the origami model downward.
71. Pull the structure at the base of the arrow to the right.
72. Now the unfolding and folding operation is underway.
73. After folding it to the left, secure it with your fingers.
74. After completing the folding, the origami style is formed as shown in the picture. Then rotate the origami model 90 degrees.
75. After rotating 90 degrees, fold according to steps 70-75.
76. Continue to rotate and repeat the folding operation of 70-75.
77. After rotating, repeat steps 70-75 to fold.
78. Repeat steps 70-75 to fold. Flip paper model.
79. At this time, you can already see the obvious outline of the origami rose.
80. Then manually fold and adjust the petal structure in the middle of the origami rose.
81. Use tweezers to curl the edges of the petals of the origami rose.
82. The outer edges also need to be adjusted using tweezers.
83. The inward structure of the outer petal edges also needs to be adjusted with tweezers.
84. At this time, the shaping and adjustment of the origami rose petals is completed.
85. What you see here is the top pattern of an origami rose.
86.The next thing you see is the structure of the bottom of the origami rose.
87. What you see here is the completed beautiful origami rose.
