Super detailed Kawasaki rose origami tutorial, with a total of 85 steps. If you still can't learn it, there is really no way. Maybe you can find a video to watch. The paper used is hand-kneaded paper, including the rose and the flower receptacle. If you are interested, please read on~~~
Step 1:
Does the folded Kawasaki rose make you feel itchy (^o^)/~
Step 2:
Have ready the square paper.
Step 3:
Fold out a small 8*8 square.
Step 4:
Fold in along the dotted line, folding all four corners in this way.
Step 5:
The four corners are folded in.
Step 6:
Note the solid white line in the image above.
Step 7:
Fold the lower half to the white solid line.
Step 8:
Expand and rotate 90 degrees.
Step 9:
Similar to the above steps.
Step 10:
Step 11:
Be sure not to miss any of the final folded textures, otherwise the next steps will not be completed!
Step 12:
Turn over texture.
Step 13:
See the little square in the middle.
Step 14:
Press inward on the diagonal line.
Step 15:
Step 16:
Step 17:
This side must face left, otherwise you may not be able to understand the next steps!
Step 18:
Step 19:
Hold this corner.
Step 20:
Step 21:
Step 22:
Make the two black lines on the top of the picture go straight to the surface below.
Step 23:
Fold all four like this.
Step 24:
Turn over.
Step 25:
Step 26:
See that the diagonal lines of the small square are folded outward.
Step 27:
It became like this.
Step 28:
ranThen press down.
Step 29:
Step 30:
The black lines above look like two straight lines, but they are actually the diagonals of four small squares, because two small squares are perpendicular to the other two.
Step 31:
Step 32:
Step 33:
Step 34:
Step 35:
Step 36:
Step 37:
If you are worried that it will fall apart and be difficult to fold, you can use double-sided tape to stick it on.
Step 38:
Step 39:
Step 40:
This is what each corner will look like after being glued.
Step 41:
Step 42:
Step 43:
Step 44:
Step 45:
Step 46:
Insert the last corner into the gap of the first corner.
Step 47:
Turn over.
Step 48:
At this time, the rose is a little flat, so you need to pull its edges.
Step 49:
After pulling it, turn the arrow inside out and bend it like a petal.
Step 50:
Read all four.
Step 51:
The arrows are also turned out.
Step 52:
Read all four.
Step 53:
The paper rose is folded by hand!
Step 54:
Next, start the origami receptacle. Generally, the paper used for the receptacle is one-quarter of the paper used to fold the rose.
Step 55:
Fold in half diagonally.
Step 56:
Fold it in half again.
Step 57:
Step 58:
Step 59:
Expand.
Step 60:
Step 61:
Step 62:
Step 63:
Step 64:
It is best to fold the folded part more so that it can exceed the center line, so that the receptacle will be smaller and more beautiful.
Step 65:
Separate from the folded part in the middle.
Step 66:
Turn over.
Step 67:
Step 68:
Step 69:
All four are like this.
Step 70:
Step 71:
Cut a small opening at the bottom of the flower receptacle to facilitate the placement of the flower arranging pole.
Step 72:
Step 73:
Then open.
Step 74:
This is true on all four sides.
Step 75:
Step 76:
Use a pen to curl the leaves to make the flower receptacle look better.
Step 77:
Take out another piece of paper.
Step 78:
Roll it up to get the flower stem.
Step 79:
Put the flower stem through the hole of the flower receptacle, put the rose and try to mark where on the stem.
Step 80:
Step 81:
Step 82:
p>Attach double-sided tape.
Step 83:
Glue the flower receptacle on.
Step 84:
Attach double-sided tape to the leaves and roses so that the roses and the receptacle are not easily separated.
Step 85:
After that, insert the rod through the hole of the rose, and a complete rose will be origami completed! Everyone must pay attention to the details, the texture must be clear, and the places to be aligned must be well aligned, so that the folded rose will be It will be exquisite!