As we get older, giving gifts to friends and family starts to become a little nerve-wracking. A super simple DIY tutorial for homemade three-dimensional greeting cards, with Polaroid as the theme. When you open the card, it will have an interesting effect like taking a photo!
【Material Preparation】
A. Prepare two pieces of slightly hard paper, which are about a little thinner than ordinary cards. They are the base of the card. After folding, the size is 7 and 1/2" x 4 and 1/2", and the color is optional;
B. A piece of A4 paper, the photos from the Polaroid camera will be printed on it;
C. Pictures from the Polaroid camera and the photos that will be stuffed into the Polaroid.
[Production steps]
1. The focus of this three-dimensional card is not only on the Polaroid camera, but also on the paper exit of the camera. When you open the card, the photo paper will "bounce" out, so you can choose a special one. Photos to create Polaroids.
Tips: In order to reduce the failure rate, remember to use drawing software to process the Polaroid photos produced afterward, and adjust the width to fit the size of the cameras paper outlet, so that the photos can be stuffed in!
2. After the photos and Polaroid camera are printed out, use a utility knife or pen knife to cut them out, and then start assembling them.
3. Glue the camera to the middle of cardboard A. The glued area is in the red area. The placement can refer to the blue line in the photo.
4. Cut along the blue line in the picture
5. Fold these parts, and the prototype of the stereo camera will come out!
A list of each angle ↓↓↓↓↓↓↓↓↓↓↓
6. Cut the paper outlet horizontally. If you are not sure, you can lightly mark it with a pencil at any time, and then gently erase it when you are satisfied.
7. The next step is the more difficult part, which is to put the cards together. You have to slowly figure out the most suitable folding angle here. Just make sure that the card can be closed and the camera can maintain three-dimensionality after opening it!
8. After folding, take out the other piece of cardboard that you have been waiting for a long time and stick it on, and it’s done!
In fact, it is quite fun to make, and the materials are very easy to obtain. You only need to be careful not to cut your hands or cut the table during the process. Friends who receive this card will also be very happy. After all, this is the best What a unique gift full of memories!
