In a garden filled with plants, add a dripping fountain. When you sit there and meditate, the breeze blows, the birds are chirping, the leaves are rustling, and the spring water is tinkling, it feels like you have escaped to a paradise~
DIY Dripping Fountain Materials:
1. Submersible pump;
2. A copper pipe with a diameter of 1.3cm and a length of 60cm (to lead the water in the pool to the ground);
3. Collection tank;
4. Stone (for decoration);
5. Small stones;
6. Internal thread joint (for connecting copper pipes to pumps);
7. Ball valve (regulating water flow);
8. Aluminum mesh (used to cover the sink);
9. Wooden bars (used to support fountains);
10. Drainage gravel (covering underground sump);
11.PVC pipe (place the water pump power cord buried underground);
Exploded view of dripping fountain production:
Dig a hole and put it into the water collection tank, which should be flush with the ground.
Bury the PVC pipe, connect the power cord of the water pump to the socket through the pipe, connect the copper pipe to the water pump, and install a ball valve in the middle to regulate the water flow. Cover the top of the sink with aluminum mesh and make a small opening to facilitate future repairs.
Lay wooden strips on the aluminum mesh to support the stone.
Drill a hole in each large stone for the copper pipe to pass through. Once all is drilled, you can start assembling the fountain.
Finally, lay gravel around the fountain as a decoration, and a simple dripping fountain is DIYed.
