Illustrated tutorial on how to make a simple leather DIY tassel bag

When it comes to tassels, people will always think of passionate gypsy girls. The tassels flying in the air with body movements are lively, smart and full of beauty. What if this simple leather bag were embellished with tassels? Instantly stands out from other similar bags, nice right? I like this tassel leather bag, so hurry up and DIY it.

DIY simple The main materials of the leather tassel bag: vegetable tanned leather, leather art tools and various tools. DIY simple leather tassel bag making steps: Step 1: Cut the leather according to the pattern. There are shoulder straps on the piping strip but not taken, just two A long bar(^_^)

Step 2: Glue the piping strips to each other. The width of the piping strip is about 1.5cm and the thickness is 1.0

Step 3: Score the piping strip (first start from the side where the two layers of skin are attached, use a scriber to follow the package Mark the cutting distance on the surface, and then adjust the edger to draw the line from the exposed side, because even if the side that is attached is polished, it will be somewhat uneven)

Step 4: Find the center of the side strips and piping strips Click

No. 5 Step: Find the center point of the bag, mark and cut it. I sewed from the middle to both sides.If there are any errors in this way, it is easy to adjust, it is a personal habit.

Step 6 : At the end of sewing, the holes for the piping strip should be punched outward from the beginning. Sew the piping strip to the inside so that the joint is not visible, which will look better~

Step 7: After sewing both sides, turn the bag over ~ before sewing The reserved holes on the surface of the bag must be punched first. The pen knife I used is not very good at carving. It will look better with a specific punch

Step 8: Finish the tassel buttons on the bag. I was too focused on doing the tassels and forgot. I took a photo??, let’s take a look~, first put the long strip into the hole and align it, then wrap the tassel in a circle and sew it up

Step 9: Fix the buttons on the bag cover and seal the edges

Step 10: The bag cover and the back of the bag are the whole Its a piece of skin. After the bag cover is processed, find the center point on the back of the bag, mark it and cut it (here I have to say that the holes on both sides of the side strips must be punched at the beginning, otherwise the front of the bag will be sewn together. It will be troublesome if you kill it)

Step 11: The effect after sewing the side strips and the back of the bag

Step 12: The other side~

Step 13: After the whole thing is done, this is it

Step 14: My shoulder straps are relatively simple , just a long strip??, seal the edge at the back

Step 15: Done

Step 16: After applying horn oil, the color has deepened. I hope it will turn into honey color

Step 17: The buttons on the cover, many people ask how Well done, repost the picture

Step 18: If the rivets are not convenient to use, sew them directly You can also put it on, and the whole bag can be used without hardware (^_^)

Tassel