The highest craftsmanship in hand sewing

Authors public account: Yuxi Creative Studio As a senior smoker, it is very necessary to take out cigarettes gracefully. Today I will teach you how to make a leather cigarette case for yourself. In the future, when passing cigarettes, you will definitely leave something for the other person. Very impressed. Patterns and Cutting Materials Students who have read my other column about pattern making must have noticed one of the pictures of cigarette box drawings. Today, the author will share it with you to promote traditional culture.

The picture above is For all the data of hand-drawn pattern drawings, students who want to do it can just press the data to make patterns. Cigarette box drawing download http://img2.pixiaojiang.com/20191206p806.pdf

All materials and tools are used to cut the leather according to the size of the pattern. The leather used in this article is a British clyton horse rein, with vegetable tanning on the inside. Pictured are all the materials needed for this cigarette box. Front x1, back x1, side x1, belt x1. The belt is a more luxurious piece of matte American crocodile. Tools required: needle, thread, diamond cone, 3mm chopper, and hammer.

Good stuff After that, scald all the edges of the skin that are leaking out. Except for the parts pictured below.

The side leather side in the picture above is not oiled. It needs to be glued here. Cut and stitched

First cut the seams where the inner and outer skins are bonded. , double rows of cut holes and cross sutures are required here.

Cross-stitch grid stitches, sew to the end first.

After reaching the end, sew a stitch straight down and then cross-sew it back to create an X shape.

Sew to the end and cut and sinter.

The X-shaped sewing method can avoid glue opening at the joint.

Then we cut from the front, Because we will need to use the Ju seam technique later, just cut to half the depth here and do not drill it through. You cannot see the line inside the Ju seam. First, make the cut holes in the front and back pieces of leather. Then align the cut holes on both sides before drilling.

Cut all three sides hole. Attach the sides to the back. As shown below.

Then get ready to start Performing the highest craftsmanship of hand sewing