Tianjin Lao Zhang teaches you how to make a personalized belt

Hello everyone, I am Lao Zhang from Tianjin. An old customer said that he wants a belt that is good enough, something that others don’t have, and that is unique. So I held it in for several days and made two. The second person commented that it was better and just told me how to do it.

Draw first This small paper pattern

Draw this again

Then when making this shape, be sure to pay attention to the fact that there must be no thickness on the edges of the piece

Then cut out the core to be drummed

The middle piece of dough is a little troublesome on the back

Then put these layers together to look like this

First sew this circle of seams and prepare to install the strap at the back

Install the small loop for the belt. I forgot to take a photo of this place. The vegetable tanned back is bulging on the back. For grooving, you have to align the two ends of the strap so that they are flat, and lie inside the vegetable tanning grooving, so that the lining is flat

It is worth noting that there must be a height difference on the back of the stubble, so that the back can lie flat. Edge sealing

Then This group is attached to the inner skin, and then the bulging core is made, and then the dough is made to become such a structure

Attach them all and smash the eyes, pay attention to this seam

Then sew it...

< img src="https://img.111diy.com/timthumb.php?src=/d/file/fujian/0491979c78010c1c29c8a57197327bb8.jpg" alt="">

Leave some amount on the side.After sewing, make a clean cut and seal the edges normally

To this extent

The shape of the belt tail depends on your mood, this time I made it like this

About this effect

Thanks for watching and see you next time! Tianjin Lao Zhang later made a watch strap of the same series, but the photo was not taken properly -_-|http://www.pixiaojiang.com/topic/show/724

Belt