Make coasters and practice drumming

It’s okay and work hard Main materials for drumming: vegetable tanned leather in three thicknesses: 1.2 side, 2.2 core, 1.8 bottom

In fact, you only need two, one with 1.8 base and one with 2.2 core. I bought an extra 1.6 one here. I will use 1.8 after trying it. The bottom is comfortable and thick.

Dig a circle in the middle , the specific size is determined by cup. a

Edge trimming , the transition is more natural after shaping.

Shaping rod Process the edges a little.

Adhere to the negative combine.

Cut a piece with a thickness of 1.2, which is slightly larger, just cut it casually. The leather I used in Argentina has better stretchability, so I used 1.6, and the Italian 1.2 is about the same. .

Cut .

Press groove .

Fa Zhan Just make a mark. This thickness cannot be cut directly.

When the French cone moves, it must be vertical.

Stitches, try filters.

Sew.

On the back, there are a few things that are not very coordinated. The cone is not vertical, and the hand is crooked. Remember to keep it vertical.

Come on.

Polish both sides of the water seal with sandpaper, and water seal several times in the middle. . The specific time depends on the situation. After the water is sealed, apply horn oil once to get a very comfortable brown color.

Use edge sealing liquid well.

Tried beveled edges on the edges.

Wax.

Complete.

Ended.

Play the drum Coaster