Make a stylish and simple leather tray

Author: ZICHUN Weibo: https://weibo.com/u/5613032860 The PU leather used in the picture is not genuine leather. If you want to use real leather, please choose very soft and thin leather, preferably sheepskin. There is also a sponge inside, otherwise the concave and convex seams in the middle cannot be made.

Plate making, First prepare the inner leather part and print the logo in the middle

Draw the outline and the parts that need sutures

After the painting is completed, the mercury strokes can be washed away

The position of the base is also drawn on the back, because it needs to be thickened

Put the rectangular thickened material with a slightly smaller margin of 0.5

Front

Start sewing the decorative lines. You can also sew by hand, but it takes a little time. Jiu

Finished sewing I found a suitable size of leather for the exterior. I used yellow-brown and made a contrasting color

On the back of the sticker

Sew along the bottom rectangle

Remove the excess part

Sewing edges

Cut corners

Suture angle

After the sewing is completed, the thread ends need to be processed

oil on top

It’s done ~ it can be placed in the studio or as a display at home. There are important things to say. Take a look, if you want to add a middle decorative line to create a concave and convex effect, you need to use soft and thin sheepskin, which is used for clothing. General cowhide is hard and tough and may not be effective. I hope it can help all my craft friends.

Tray