Home > Handicrafts of life > Handmade leather goods

The process of making a small square bag with a raised lid

Author: Atui, Weibo: https://weibo.com/u/2808192692 After completing this small square bag, many leather friends asked me to create a production tutorial. I said no, I want to go out and play.

The process of making a small square bag with a raised lid

Hello everyone, I am Atui. This time I will share with you the making process of this small square bag. Because there are many wild paths in normal production, there is no tutorial. First, carry out the preparation work before production.

The process of making a small square bag with a raised lid

Gun Gun Handmade< a href="https://www.111diy.com/shougong/piju/" target="_blank" class="infotextkey">Leather goods drawings, according to personal needs, I reduced some of the drawings.

The process of making a small square bag with a raised lid

Most required Tools used.

The process of making a small square bag with a raised lid

The most important , of course a pair of dexterous hands is indispensable.

The process of making a small square bag with a raised lid

Finished pictures are available You can see that there is a raised bulge on the cover of the bag. For this drumming, you need to draw another picture yourself. Use a spacing gauge to determine points and lines, scale down the package cover image, reserve the part for cutting, determine the position of the drum, and then use a paper knife to cut it out. Here I recommend using a 30° paper cutter.It feels better to cut in.

The process of making a small square bag with a raised lid

Unable to load To repeat, I use a paper knife and a leather knife interchangeably. It should be emphasized that knife skills are very important and it is necessary to practice the basic skills. The cut leather is accurate in size and has smooth edges, which will save you a lot of time in various post-production processes. For practice, you can use cardboard or vegetable tanned leather to draw lines and cut with a knife, without a ruler, until the edges are smooth and straight.

The process of making a small square bag with a raised lid

Practice this To a certain extent, that’s about it.

The process of making a small square bag with a raised lid

Sheepskin has stretch The finished product will deform to varying degrees during use. If you want it not to deform, it needs to be reinforced. There are many kinds of reinforcements. For the base leather, I used Sully French Sheep 0.5, which I pasted on 0.7 leather fiber and then cut it finely.

The process of making a small square bag with a raised lid

The core material used for the drum is rounded and polished to facilitate gluing. The bulging part and the bottom must be in contact with each other in a curved manner, so that the transition will be natural. Curved bonding allows you to place the skin on a cylinder that suits your needs for bonding.

The process of making a small square bag with a raised lid

The outer skin is also 0.5 , Hermès Crispe sheepskin. The sheepskins inside and outside were all bought at Mo Xiyans house. Fit a large area and cut off excess skin after shaping each position.

The process of making a small square bag with a raised lid

Other parts are similar.

The process of making a small square bag with a raised lid

Be sure to keep your hands steady and vertical when cutting. Shaking hands will cause the hole on the other side to become skewed. , the stitches sewn are very unsightly. Cutting also depends on practice. Some leather friends said, why do I still get crooked stitches after practicing for so long?

The process of making a small square bag with a raised lid

Friend, to be honest, maybe you need this.

The process of making a small square bag with a raised lid

Then some hot seams are oily on the seams Edge ironing oil.

The process of making a small square bag with a raised lid

The process of making a small square bag with a raised lid

Zipper bag It is very soft and inconvenient to sew. Use a ruler to fix it and it will be more efficient to sew.

The process of making a small square bag with a raised lid

The edges are thinned to sew the zipper bag and organ, and the thickness is controlled so that the hardware can be installed. Thinning is also requiredKeep practicing, either a wide shovel or a thinning knife will do, but 801 is the best. During the early practice, I also cut through a lot of skin. Some skin friends will also ask me if I don’t want to practice for so long and want to achieve stable results in a short period of time.

The process of making a small square bag with a raised lid

Then the following Do this exercise.

The process of making a small square bag with a raised lid

Sew all parts , oil it and install the hardware. I bought my hardware from Qiaoyuan, and it feels very good. I was almost done when I realized that I forgot to make the zipper pull. I couldn't stop crying.

The process of making a small square bag with a raised lid

The zipper head is also To make a pattern, you can make the shape you like. What I made this time was long.

The process of making a small square bag with a raised lid

Small objects , it also tests a person’s patience and skills. No more carelessness. I didn’t take any photos of the process of making the tassels, it’s quite simple. Finally, here are a few pictures of the finished product. The photography skills are quite average, so you can just make do with it.

The process of making a small square bag with a raised lid

The process of making a small square bag with a raised lid

The process of making a small square bag with a raised lid

The process of making a small square bag with a raised lid

The process of making a small square bag with a raised lid

For me, every work is my time. I try my best to make each work the best, just to be worthy of my time. This sharing ends here, what you can see here is true love.

Small square bag