p>Pull the rubber band out of the second hole Step 10:
Put the rubber band through the third hole from the inside of the leather and pull it out. Step 11: Put the rubber band through the fourth hole from the front of the leather and pull out the 12th hole Steps: Stretch the two rubber bands to the same length and tighten them until the leather surface is bent as shown in the figure. Step 13: Knot the two rubber bands together Step 14: Put a metal buckle on each of the two small tails and tie them with a knot. Step 15: Step 16: Thread the metal buckle into another shorter rubber band. Step 17: Center the two sections of the metal buckle Step 18 of equal length rubber bands: Thread the rubber band from the front of the leather into the hole in the middle of the leather. Step 19: Pull out the rubber band as shown in the figure. Step 20: Knot the rubber band step 21: Find the middle page of the notebook, spread the notebook out and pass it through the two parallel rubber bands as shown in the figure. Installation step 22: Use the elastic rope at the back to cover the entire book. Step 23: Complete the 24th Steps: Like Tutorial friends, remember to like and comment to support us. Your support is our motivation, and we will continue to update more and better tutorials for everyone ^_^Laptop Leather Case