Tutorial for making 12 zodiac card packs, dog, monkey, and ox

Author: Ding Dings Leather goods shop Taobao store: https://s. click.taobao.com/vCJnpPw Very simple card package production, extremely friendly to novices.

Main materials: 1/3 foot of yellow matte wax leather, 1 snap button Tools required: 2 hand sewing needles, 1 meter of flat wax thread, 1 bottle of edge sealing liquid, 1 bottle of glue, 1 sand strip, 1 piece of cotton cloth, cotton swab Several production steps:

This puppy card holder is basically the simplest one in the 12 zodiac series. First we choose 1.5~1.6mm matte wax leather

The surface of the first layer of vegetable-tanned cowhide is covered with a layer of wax, which has an anti-fouling and anti-dirty effect. At the same time, after years of use, it has a retro and vicissitudes of effect. And after letting it sit for a period of time, the wax layer that was wiped off will re-infiltrate from the skin to form a wax layer. Very suitable for young people to use.

First make Kraft paper pattern.

Then use an awl Draw outlines along the pattern.

Use a paring knife Cutting material

Select The right hardware.

Use a press Installing the four-button buckle will be neater. All hardware in the material package has been installed. I didn’t take a picture of the process of installing the hardware. I’ll use the installation diagram of another card package instead.

Punch holes, Prepare for sutures. Or use the punching process of other card packages to illustrate:)

Hand-made stitching is still the traditional double-needle double-thread saddle stitching method. The stitches appear full.

Finally, the closure edges to make the edges of the leather more rounded and smooth. After sanding, apply a layer of edge sealing liquid and polish with cotton cloth in a semi-dry state.

Finally, this cute puppy card holder is finished. Enjoy your masterpiece! Tips: The ears of the puppy can be edge-sealed and pre-processed first. . Otherwise it will be difficult to seal the edges after sewing.

Card holder