Twelve card slot color matching handbag long wallet production

Multiple colors Paired with regular geometric lines and different textures of palm prints, a perfect handbag making tool: leather knife/utility knife, cotton swab, crimper, edge oil stick, hammer, scissors, awl, nozzle scissors, hardware punching table , chopper, needle, scraper, rubber pad, cutting pad, sandpaper, sand strip. Production materials: leather, glue, bed surface treatment agent, thread, edge oil, magnetic buckle, zipper and zipper puller, etc. Detailed production steps:

Cutting: There are 18 pieces of leather goods in total. Then a piece of spunlace cloth is used to support the bottom, and the edges are thinned

The first step is to treat the bed surface. Just a few pieces of unattached card seat leather and cushion leather for bed surface treatment

The edger presses the edges, each edge

Then oil the edges, or the edges of some small pieces should be oiled first. Otherwise, you will not be able to sew after pasting and sewing. " alt="">

The positioning grid marks the punching position and leatherPaste position

Zipper handle. The YKK 3# zipper used here

Use nozzle pliers to cut off the zipper teeth of appropriate length at both ends

Install the slider, and secure the ends at both ends, and handle the zipper cloth at both ends

Lined zipper bag production

First punch holes on the edge of the zipper bag leather goods.

Then with the zipper fit. The zipper cloth does not need to be punched to prevent it from spreading

Punch holes and suture, just sauce

And sew the bottom

Paste the organ position and zipper bag

Four pieces of accordion leather are pasted on the four sides of the zipper bag. Side

Side Cutting sutures

Oil edges on both sides and bottom of the zipper bag

Then according to the position of the pattern mark, paste the card space leather on the card pad

First apply one layer of cut stitches, and then apply the second layer, the same. Then attach the third layer, and cut stitches in the middle of the three layers of leather together

The third layer of card slot leather Leave the bottom unsewed first.

< /p>The padding of the card slot fits the accordion piece. When gluing, pay attention to the direction of the zipper

Attach the two sides of the organ cutout and sew together with the bottom

The inner lining and the buckle leather are fitted and cut with stitching

Similarly, there is no seam at the bottom of the card slot on the third layer. Line

Cover cover part

There is a hole on the front of the bag cover, and a magnetic buckle is installed

The cover part is covered with orange skin

Cut sutures

< img src="https://img.111diy.com/timthumb.php?src=/d/file/p/9db8318641479ee15bbd66fe9b79e5bd.jpg" alt="">

Then in turn, fit one side of the organ piece to the lining leather

< img src="https://img.111diy.com/timthumb.php?src=/d/file/p/83d7d9d5667415916b00aaa7d7949696.jpg" alt="">

Skin treatment: paste leather goods of different colors on the large surface

Then chop and use different lines Stitch

In the dough according to the positioning grid The installation position of the magnetic buckle is opened at the top

Attach magnetic buckle

The dough and lining are glued together, and the glue is only applied to the edges

As shown in the picture after pasting

Then cut the suture on the outermost side

This is it after sewing

The last step is to oil the edges. I won’t go into details.

Then be beautiful from every angle

To purchase patterns and material packages, go to tb "Wutadiy DIY Boutique" https://wutadiy.taobao.com

Handbags