Making shell bags (burgundy fog wax)

The front section of the core wrapping should be processed first and the edges should be sealed.

Pay attention to the bottom here and add a hard lining (not very (Know its scientific name), it has strong hardness

To bond the inner skin, I use map pig skin. After bonding, peel off a circle of pig skin about 1mm around. You can use a thinning knife or a peeling shovel. Completed (because of the pigskin, it is difficult to seal the edges)

< /p>

When gluing the zipper, pay attention to the distance between the zipper and the sides, equidistant, and mark the obvious position. Mark both halves! It is best to make more to reduce errors!! Remember, remember.

Pig skin is perforable, you can You can use chops or awls

When attaching pigskin, I sew the handle after attaching it (I prefer to see the feeling of stitching). If the pigskin has an inner bag sewn, it must be sewn first. Handle!!!

Place the original pattern in the upper position, draw a line, and cut off the excess pigskin (note that the pigskin needs to be stitched, don’t cut too much

The bottom is sewn. I sewed it in two places, and the last few holes on both sides were not sewn

Shell bag