The production process of polka dot handmade business card bag

Author: Dot Handmade Weibo: https://weibo.com/u/2846629064 Let’s take a look at the renderings first

1. Paste the pattern paper on the kraft paper, and then cut out

2. Cut materials according to the pattern

3. Sharpen the edges of each component Thin, they are the outer skin, cover with concealed buckle, and organ

4. Glue the middle piece

5. Align the stickers, and then compact them with a roller

6. Make corrections according to the layout

7. Draw decorative lines on the upper and lower edges. Chrome tanning requires hot pressing. It is recommended to use an edge ironing machine

8. Oil the edges

9. Process the side organ and paste reinforcing cloth on the back of the organ skin to prevent stretching

10. Pay attention to the skin on the back There is some curvature

11. Edge correction

12. Draw decorative lines

13. Fold the style in half on the middle spacer, clamp it with clips, and cut it

14. Sew the organ together

15. Deal with dark lids Use the folding method, so leave about 1cm on the edge to reinforce the fabric

16. Glue the edges

17. Folding

18. Install the buckle on the lid

19. Gum the outer skin

20. The outer skin is attached to each other. Note that there are two curved surfaces

21. Sew the upper edge of the outer skin first and draw decorative lines

22. Install the other half of the button on the outer skin

23. Fit the buttoned cover to the outer skin

24. In Draw decorative lines on the edge of the outer skin

25. The entire cutting suture

26. Add the edge to the edge, and you are done

Finished product display

Note: The leather used in this production process is Italian palmprint cowhide, and the buttons are thk dark side drum buttons

Business card holder Card holder