Home > Handicrafts of life > Handmade leather goods

Make a bridle leather belt using an acrylic belt ruler

[Sharing Highlights] (1) The leading folding part is thinned by half the thickness and inlaid to maintain perfect unity; (2) The acrylic belt ruler comes with two finishing patterns, both designed using the golden section spiral ratio ; (3) The hole-cut stitch design is reasonable and beautiful. Main materials: dark brown dyed horse rein leather belt strips, leather Uplay edge sealing liquid. Tools required: leather knife, utility knife, edger, 35mm acrylic belt ruler, edge trimmer, round chopper, awl, hand sewing Steps for making needles, sandpaper, and cotton swabs: 1. Use a ruler to mark the line and cut the head end of the belt.

Make a bridle leather belt using an acrylic belt ruler

2. Use Use a cotton swab to draw water, and use a 1.5mm edge holder to press the decorative line.

Make a bridle leather belt using an acrylic belt ruler

Make a bridle leather belt using an acrylic belt ruler

Make a bridle leather belt using an acrylic belt ruler

Make a bridle leather belt using an acrylic belt ruler

3. Use No. 3 edge cutter to straighten the belt strip. The reverse side is chamfered.

Make a bridle leather belt using an acrylic belt ruler

Make a bridle leather belt using an acrylic belt ruler

4. Use a sanding rod, sandpaper, and edge sealing fluid to Belt strip edge sealing. (For the detailed edge sealing process, please refer to the previously shared article "Sharing the edge sealing and dyeing methods of vegetable tanned leather").

Make a bridle leather belt using an acrylic belt ruler

Make a bridle leather belt using an acrylic belt ruler

5. Cut the belt head to half the thickness, about 12cm long, and then cut it off. (If you have bought it before If you have leather belt strips, the belt head has been thinned, so ignore this step (