Tutorial on how to make a gold bag for mobile phones, which eliminates the trouble of zipper mobile phone bags and allows you to quickly and easily take out the mobile phone in the bag. For specific instructions on how to make a mobile phone bag with gold, please refer to the illustrated tutorial below.
Mobile phone bag making materials:
Tab A: 2 pieces of patterned cotton;
Table cloth B: 1 piece of jade cotton and linen cloth;
Lining: 1 piece of cotton;
Pocket cloth: 2 pieces of cotton, 7.5×16.5 cm;
Mouth gold: 7 cm wide, 4 cm high, 1 U-shaped mouth gold;
Lace: 1 piece of 27cm or 2 pieces of 13.5×2cm;
Thin cloth lining and cotton covering;
Complete size of mobile phone bag:
Width 9 cm, height 13.5 cm, thickness 4.5 cm.
How to make a mobile phone bag:
1) First iron the surface fabric A, B and lining fabric, then cut them;
2) Sew fabric A and fabric B as shown in the picture (please use a backstitch if you sew by hand);
3) First sew the decorative lace, then iron the single glue and lay the cotton (hand sewing with a flat stitch);
4) First fold the pocket fabric in half so that one side is 0.5 cm longer, then sew both sides and trim the seam allowance;
5) First turn the pocket fabric to the front, and then sew 0.2 to 0.3 cm away from the bag mouth (use a flat stitch for hand sewing);
6) First sew the pocket fabric onto the lining;
7) Then turn the pocket fabric toward the pocket opening as shown and iron it, then sew a U-shaped fixation (if you sew by hand, use a half-back stitch);
8) After both pockets are sewn, fold the lining in half and sew both sides of the body (use a backstitch for hand sewing), leaving a 5 to 6 cm return opening, and then cut at the arcs on both sides. tooth mouth;
9) Lining base 4cm;
10) The surface bag body is also sewn on both sides first, and then the base is 4 cm;
11) Completed lining and surface bag body;
12) Place the lining bag body into the outer fabric bag body (face to face), sew the bag mouth 1 turn, go back 1 to 2 stitches when sewing on the side, break the thread, and sew again;
13) Cut the seam at the curvature of the bag mouth or use serrated scissors to cut off excess seam allowance;
14) Turn it over to the front, sew it back with a hidden stitch, then iron it, press and sew one circle 0.2 to 0.3 cm away from the bag mouth (use a flat stitch for hand sewing);
15) Find the center point of the bag body, fix it with the single-hole stitching method, then insert the bag fabric into the stitching, align the side stitching line with the side of the stitching, and use the point-in-point-out stitching method Start sewing;
16) When sewing from the right side of the bag back to the center point, start the stitch first to fix it, and seal the bag mouth.Stuff the cloth into the gold seam at the entrance and arrange it, then sew toward the center;
17) The completed mobile phone bag.