Recently, I have been obsessed with all kinds of very complicated handicrafts, such as hand-made diamond rings and furniture, which are very exciting. I only regret that I don’t have such good skills, but the following is the production of a heart-shaped USB disk. , as long as you are careful, it is relatively easy. Wouldn’t it be super romantic to use such a heart-shaped USB flash drive as a Valentine’s Day gift on Valentine’s Day? Of course it can also be used as a Mothers Day gift.
Main material: U disk, metal U disk sleeve, clay, hard plastic sheet, Tools required: Scissors, paint, craft glue, Production steps:
Step 1: Prepare the USB flash drive
Step 2: Disassemble the USB flash drive and take out the pieces inside
Step 3: Then design the drawing according to this size
Step 4: Install it into the metal shell, and then use pliers to make a small ring at the end for hanging the rope
Step 5: The next step is to follow the drawingsMade, cut the plastic sheet into a circle
Step 6: Make the rotatable circular part and fix it on the USB flash drive. You can remove the loop in the middle of the tape to use
Step 7: Use clay to shape
Step 8: Cut the heart-shaped plastic piece
Step 9: Assemble it like this, test whether the U disk rotates smoothly, and make adjustments in time
Step 10: Color the top of the USB flash drive
Step 11: Then assemble it, shape the clay, and test the rotation of the USB disk at any time
Step 12: Set aside until the clay dries
Step 13: Now you can stick a layer of textured material on it and then color it
Step 14: In order to achieve the best coloring effect, you can apply the color once, let it dry, and then apply the color again, repeat three times
Step 15: Let dry before painting