The first step in making iPhone polymer clay is to wash your hands first!
1. First prepare an empty white phoenix shell
2. Choose your favorite color, spread it evenly on the case as the base of the mobile phone case, and slowly squeeze out the air between the soft clay and the case by hand. Use a utility knife to remove excess polymer clay from the edges.
3. Roll the white soft clay into a slender noodle shape, remove the head and tail, take a uniform part in the middle, cut it into slices with a utility knife, and then stick it evenly to the shell. The bottom of the shell has a jade pattern. The tattoo is completed.
4. Choose a flesh-colored flat soft clay, place the rabbit’s face template on the soft clay, then use an awl to slowly scratch along the rabbit’s face, and then use a utility knife to deepen the scratches. Wait until the rabbit After the face is basically formed, lift up and remove the excess polymer clay around it.
5. The rabbit’s eyes and blush are made in the same way as the water jade pattern, using brown and pink polymer clay respectively.
6. The rabbits mouth is the most difficult to make. First, use brown soft clay to make a very thin line, pick up the thin line, and use a utility knife to glue it into the arc of the mouth. Then fill the middle part of the mouth with pink polymer clay and the same steps as before. Then use brown soft clay to glue the arc under the mouth.
7. The cherries and letters are made of jade patterns and thin lines.
8. Finally, put it in the oven at 100 degrees for 20 minutes, take it out and wait for it to cool before putting it in the oven again for 10 minutes. Take it out, cool it, and the iPhone polymer clay shell DIY is completed!
