Illustrated tutorial on how to DIY handmade baby bibs and bibs using idle ties

What I would like to share with you today is a DIY tie made from idle itemsHandmade Illustrated tutorial on how to make baby bibs and bibs. They are very suitable for babies to wear when going out. They are also very handsome~~~

Preparation method:
1. Disassemble the big end of the tie first, without disassembling too much. About half the tie will do.

2. Draw the paper pattern according to the triangular saliva towel cutting picture, and cut out three sections like this according to the paper pattern.

3. Cut the middle part into straight outlines on both sides as shown in the figure.

4. Then sew the three pieces together. Then cut according to the triangular saliva tissue paper pattern.

5. Fold both sides inward to create a 1cm seam allowance. Because the fabric is very thick, it is fixed with single-strand stitches and ironed

6. Cut a piece of lining as big as the tie fabric

7. Sew the tie surface fabric and lining fabric opposite each other at the front of the arc collar position, and cut the edges.Turn the pattern back to the front to make it neatly curved. After it is done, turn it back to the front and iron it into the finished shape.

8. Then fold the right-angled edge of the lining fabric inward by 1 cm, fix it with a bead stitch, and sew it with the tie fabric using the hidden stitch method.

9. Sew concealed buttons on both ends, and the bib is ready for going out.

10. The final rendering.