Use waste from large and outdated T-shirts to DIY tight-fitting hollow T-shirts. For specific DIY methods, please refer to the graphic tutorial below.
Main materials:
1 piece of old T-shirt
Tools required:
Scissors
Production steps:
Step 1:
The materials required for the tutorial are as shown below. A big T-shirt
Step 2:
As shown in the picture, cut the T-shirt along the seams on both sides to about the armpits.
Step 3:
Align the two cut sides and front and back pieces of fabric neatly, and cut out fringes with a spacing of about 1-3cm and a depth of 5cm as shown in the picture. The left and right sides must be cut like this~ The specific size can be slightly adjusted according to personal preference and the actual size of the T-shirt.
Step 4:
Tie the corresponding tassels on the front and back pieces into a flat knot, as shown in the picture.
Step 5:
Repeat the previous step and you will get the effect as shown in the picture.
Step 6:
After the tassels on both sides are tied into a flat knot, make slight adjustments according to the appearance, such as making the knot larger and stronger, or shortening the tassel slightly. The effect is as shown in the picture.
Step 7:
After the adjustment is completed, it is completed~as shown in the picture, the effect is very good~
Tips:
In this tutorial, the scissors cut deeper, and the hollowing effect on both sides of the T-shirt is great~
