Home > Turning waste into treasure > Renovation

Use plastic bottles to make your own shoe braces. Simple boots support stand DIY tutorial

Use plastic bottles to make your own shoe braces. Simple boots support stand DIY tutorial

For most female friends, shoe cabinets are the same as wardrobes. The bigger the better. Although buying shoes is easy, how to store shoes is definitely a reality that must be faced. Especially boots, if they are squeezed into the shoe cabinet casually, they will definitely be wrinkled when worn out every other year. The material of the boots may even deteriorate due to long-term compression of the boot shaft. It is not cost-effective to only wear them for one season. The tutorial for DIY boots support frame looks quite high-end and fashionable. The point is that you don’t need to spend a lot of money. You only need to collect a few plastic bottles. Come and have a look!

Use plastic bottles to make your own shoe braces. Simple boots support stand DIY tutorial

Because they are long boots, one pair of boots requires two plastic bottles, and one pair of boots uses four plastic bottles. Cut off the mouths of the plastic bottles respectively, insert one plastic bottle into another plastic bottle, adjust the length according to the length of the boot, and then use tape to glue the joints tightly. In this way, the prototype of the support frame has roughly come out, but In order to make the support stand easier to handle and more beautiful, you need to prepare ribbons, tassels (for decoration, optional) and artificial fur fabric.

Use plastic bottles to make your own shoe braces. Simple boots support stand DIY tutorial

Fold the ribbon into a liftable state, tie it with a decorative tassel, and tape it together to one end of the joined plastic bottle. You can use a lighter to burn the cut area of ??the ribbon to avoid stripping.

Cut the artificial fur to the appropriate size according to the joined plastic bottle. You can use other fabrics according to your personal preference. Fur fabrics will easily collect dust, so be careful. Then use hot melt glue to stick the fabric to the plastic bottle. Don’t forget to cut a small hole in the fabric for the hand-held ribbon and tassels so that the tassels and ribbons can pass through. Be careful when using the heat gun.

Use plastic bottles to make your own shoe braces. Simple boots support stand DIY tutorial

The finished product has no trace of a plastic bottle inside. With the ribbon handles, decorative tassels, and fluffy faux fur, it looks like it was bought in a boutique. It can not only store boots but also By the way, let’s extend the life of boots, let’s try it together, fashionable girls!