Illustrated method of DIY handmade ashtray from cans

Discarded cans actually have many uses. Men sometimes smoke at home and when there is no ashtray, the ash will stain the floor. So today we are going to transform the can into a practical ashtray. Let’s take a look at a very simple method.
Materials/Tools:
1. A can, beer bottle, or Sprite bottle are all acceptable.

2. A pair of scissors, preferably Sharper and easier to use

Method steps:
1 . Divide the can into two parts. The upper part with the opening can only be used about 5cm. The longer the lower part is, the larger the capacity will be. Haha, I almost split it in the middle.

2. Pick up the part with the opening and cut it into 2-3mm wide wire shape. Cut until the diameter is reduced. Generally, the total number of cuts is best to be a multiple of 6 or 8. I cut it randomly, and it happened to be a multiple of 6.

3. After cutting, fold it out 90 degrees Spend

4. Start braiding twists
A. Fold the adjacent two pieces in half first.

B, and the outer two

C. I folded six strips in total. Of course, eight strips are also acceptable, so the shape of the petals will be larger.

D. After folding, fold the excess The length is hidden on the back and trimmed with scissors

5. After everything is compiled, Put it on top of the lower part and it becomes a smokeAshtray. Beautiful, practical, hehe

Warm tips: If you want to try childrens shoes, be careful if your fingers get scratched!