Make a camera model of Coke cans. Is the finished work very realistic? The unwanted waste can be turned into beautiful handicrafts. Interested friends can prepare 4 cans and follow suit~
Drinking so much Coke is a sin!
Use a utility knife to cut off the lid and bottom of the can to obtain two rectangular pieces of aluminum skin.
Two cans were used here.
Then join the two pieces of aluminum skin and trim the edges.
It is beautiful and will not scratch your hands.
Take another can and make a camera lens. Cut out triangles around the cut edge to fix it on the camera.
Like this.
Assemble the lens and camera body together.
Cut another piece of aluminum skin to seal the top of the camera.
Cute camera model DIY completed.
You can also use scraps to make shutters for cameras.
You’re done, let’s give it to your children to play with~
