For many children, the best holiday gift is to believe that it is Every parent of a kindergarten child will encounter this. The editor of the production department has sorted it out here and brought you some of the most beautiful handmade origami flowers. Let’s see how to make them right away!
The gorgeous transformation of a piece of cardboard
The ingenious teacher Xiaoli teaches everyone to use colored paper to make small flowers that will never fade
A big-headed flower that can stand anywhere
Preparation materials: thicker A3 paper (other sizes are also acceptable), watercolor paint, watercolor brush, scissors, glue
Production steps: Color the white paper with watercolor paint. Paint it with your favorite color or draw some random stripes. Whatever you know, just draw whatever you like! Then wait for the paint to dry (it will take about an hour). If it is not dry enough, it will affect the next step.
Draw a large petal on the paper. Generally, make sure the petals are symmetrical on both sides and the edges are smooth and flat. If you have no idea what kind of petals to draw, just refer to this. Draw another petal that is 2/3 the size of the previous petal, and then draw smaller petals. A total of 5 sizes are needed. The principle is that each petal is 1/3 smaller than the previous petal. Don’t waste it. Draw on the same piece of paper. , change to another one after painting, 6 pieces of each size (today I will make a 6-petal flower).
Dear friends, don’t throw away the remaining scraps in a hurry, keep them for later use.
Cut a slit in the middle of the bottom of each petal.
Apply glue to the edge of the opening on one side, cross-glue it to the other side, and let go after the glue dries. These two steps will make the petals form a certain arc and become three-dimensional.
Cut a circle out of white paper, apply glue on one side of the petals, and stick it on the round paper.
Adhere the remaining petals to the circle piece in turn, each petal partially overlapping the previous petal until six petals form a circle.
Hold the glue area and wait patiently for it to dry.
Add the remaining petals layer by layer in the same way. After all the petals are glued, check whether they are full enough. Because the petals are relatively large, the 5th layer is a bit thin. Finally, another layer of 3 petals was added.
For the stamen part, cut two small petals from scraps and roll them around the brush barrel. Fix them with glue. Apply glue to the bottom and stick them to the center of the flower.
In this way, a huge flower is completed~
Production of the pole part: PVC material is too fragile. You can use wooden sticks or metal poles to DIY an upright pole yourself, or you can directly buy a floor-standing clothes hanger from Baobao or other poles that can stand upright.
The pole can be decorated with green crepe paper to look more like a plant, and then glue the flowers on it.
If you like slender petals like chrysanthemums, it’s even easier. Just tear off the petals with your hands. You can use foam with a cotton swab inserted into the stamens, or even a bath ball.
Isn’t it special to put it on a wedding?
Nowadays, many foreign couples like to use large paper flowers to decorate their weddings, and we may consider using them to decorate every corner of our home.
Cardboard bouquet
Preparation materials: colored cardboard, scissors, glue gun, pencil
Production steps: Fold the paper in half and cut out a small strip at the end of the fold line
Roll up the paper and fix it with a glue gun, opening each leaf outward
Use scissors to cut along each fold line
Use a pencil to draw the shape of a small flower on the cardboard and cut it out one by one
Choose another color to cut out round flower cores, and paste them one by one on the previously prepared florets
Use a glue gun to stick the finished flowers on the leaves
You can make flowers of different colors and shapes according to your own preferences~
Cardboard Camellia
Preparation materials: colored cardboard, glue stick, glue gun, scissors
Production steps: Cut out three groups of large, medium and small petals and prepare 6 pieces for each group
Use scissors to cut a small opening at the bottom of each set of petals
Roll up the upper end of the petals and fold the opening at the other end to fix it with a glue stick. At this time, the petals should appear three-dimensional~
Cut out a circular base, and then place 6 petals in a circle and fix them on the circular base
Use a glue gun to fix the flower core in the middle of the superimposed petals, and the beautiful camellia is complete~
Everyone can make camellias of different colors according to their own preferences~
Jam paper Zou Ju
Preparation materials: colored cardboard, scissors, glue stick
Production steps: Cut out a wide paper strip and a thin paper strip
Roll up thin paper strips to make flower cores, and cut out small strips from wide paper strips to make petals
Wrap the petals around the core and slowly roll them up
Open the petals and press them slightly
The flower core can be rolled up with a few more strips, and the petals can also be cut out to make a daisy with a large flower core and many petals~
Use a pencil to slightly curl the petals, so that the petals of the daisy will look more natural~
The prosperous flower arrangement in a bottle
Preparation materials: crepe paper (various red, pink, aunt color and rich gold, or other colors, but the red color is festive), 502 super glue, napkin, tape, wire, scissors
Production steps: Cut a 5cm×5cm square napkin, roll it into a ball and stick it on the wire. Cut a 4cm×4cm piece of gold crepe paper, apply glue, wrap it around the napkin to make a stamen.
Choose dark purple crepe paper, cut a rectangle of 3cm x 16cm, cut one side into pieces, apply glue on the bottom, and wrap it around the stamen.
Using red crepe paper, cut 7 petals from a flower, 3 petals are smaller and 4 are slightly larger.
Cut itThe petals are stuck to the outside of the flower center one by one, the small ones are inside and the big ones are outside. Note: Crepe paper is very elastic. After a flower is made, it can be pulled, rolled, and adjusted to the look you like.
Wrap black or brown tape from the receptacle along the wire, pretending to be branches, use petals of different sizes and colors to make more flowers, and put them in bottles of various shapes to look different from flowers. style.
Paired with golden fern leaves, it will be more flavorful
If you still find these two methods troublesome, or you are not good at handling paint and complex petals. There is also a very simple method of making paper flowers. I guarantee you can learn it as soon as possible. If not, there is nothing I can do (spread my hands).
White flowers reborn from waste paper
Preparation materials: coffee filters or paper holders under cup cakes, draft paper, newspapers, scissors, tape, bamboo skewers
Production steps: Fold the coffee filter paper in half, cut two notches, cut out the shape of petals, and cut a cross shape in the middle.
Fold draft paper or newspaper into long strips, cut one side into pieces, and roll it on the top of a bamboo stick to make a stamen.
Put the petals in from the other end of the bamboo stick and fix with glue. Done!
The small white flowers made from recycled coffee filters and draft paper are fresh, beautiful and environmentally friendly.
Cute little flowers made from waste newspapers and old magazines
In addition to standing on poles or placing them in vases, paper flowers have many other uses. In some situations where it is too difficult to use fresh flowers or a large amount of fresh cut flowers are needed, paper flowers can be used instead.
Decorating the mobile bar
Party scene background wall
Paperroses stand, with flowers blooming inside and outside the vase p>
Giving someone homemade paper bouquets is special
Paper calla lily
Preparation materials: white and green cardboard, green wire, scissors, glue gun, twist stick, colored pencils
Production steps: Choose white cardboard and cut out a few fat drop-shaped pieces, and bend the edges slightly toward the back
Use colored pencils to draw a portion of yellow on the bottom of the back, and superimpose green on top of the yellow
Roll up the flowers and fix them with a glue gun. Remember to make them into a trumpet shape and turn the edges outward
Cut a piece of yellow twist stick, leave a section and twist it on the wire to make the stamen part of the calla lily
Put a section of the stamen through the flower and fix it with a glue gun
Choose green cardboard and cut out the shape of leaves
Use a glue gun to fix the calla lily on the stem and it’s ready~
