Although it’s not the Dragon Boat Festival yet, I still feel a little regretful that I didn’t share this interesting origami triangle tutorial with you in time. This tutorial on origami triangle with dragon boat is much easier to make than the previous origami triangle with swan (for details, see: Origami triangle with swan tutorial). I have seen some origami triangles with dragon boat on the Internet before. If it were not for the lack of tutorials It’s just that the production is rough. If you are interested, you might as well try this origami triangle-shaped dragon boat. It is definitely a very suitable production for the Dragon Boat Festival!
1. First, make enough triangle inserts. The specific production method is mentioned in the previous article about origami triangle inserts, so I won’t go into details here (for details, refer to: 3D Origami Introduction and Tutorial). This production requires a total of 343 red triangle plugs and 509 pink triangle plugs.
2. Start combining the triangle inserts here: the first row needs to use 4 red triangle inserts; the second row needs to use 3 red triangle inserts; the third row needs to use 4 red triangle inserts Insert; the fourth row needs to use 3 red triangle inserts; the fifth row needs to use 4 red triangle inserts; the sixth row needs to use 3 red triangle inserts; the seventh row needs to use 4 red triangle inserts ; In the eighth row, use 3 triangles, with the pink one in the middle and red ones on both sides.
3. At this time, the hull needs to be expanded. Six triangular plugs need to be used in the ninth row, two red triangular plugs on each side, and two pink triangular plugs in the middle.
4. In the tenth row, 5 triangles are needed, the 2 on the side are red, and the 3 in the middle are pink.
5. In the eleventh row, you need to use 8 triangle plugs, two red ones on both sides and 4 pink triangle plugs in the middle.