Teach you step-by-step how to make rubber stamps from scratch

Although the materials for rubber stamps can help you expand your ideas for making rubber stamps, for many rubber stamp crafting beginners, what they need more is a complete manual illustrated tutorial, that is, from the preparation of materials and tools , all the way to the collection of pattern materials, and even the process of pattern transfer and engraving, we hope to be able to display it in a complete manual illustration, so we are here to share such a manual illustration tutorial, from the details and the entire system From a step-by-step perspective, I will teach you how to make a complete rubber stamp.

Step 1:

Making rubber stamps requires slightly more materials and tools, but some are not necessary. You can choose according to your actual conditions< /p>

Step 2:

What we use here is the printed picture directly, so attach the picture to the rubber brick and soak it with nail polish remover

Step 3:

After getting wet, you can see the pattern on the back, then cover it with a layer of plastic and start scraping

Step 4:

< img alt="Teach you step by step how to make a rubber stamp from scratch" src="https://img.111diy.com/timthumb.php?src=/d/file/20220222/4iv0wo41ggz.jpg" />

Almost the same After peeling it off, you can see that the complete picture has been transferred to the rubber brick

Step 5:

You can apply a layer of loose powder

Step 6:

Cut off the excess rubber bricks

Step 7:

Then you can start carving along the line at an angle of 45°

Step 8:

Follow the outside of the line

Step 9:

It is best to carve this line in one go< /p>

Step 10:

Then carve in the opposite direction, with the knife slightly outward, or at a 45° angle and start carving

Step 11:

This will create a slot

Step 12:

Lets carve along the lines like this

Step 13:

Start carving out the blank space. Here’s what the garment board looks like

Step 14:

You can lightly draw horizontal lines to facilitate production

Step 15:

Step 16:

Cut the blank part inside into a washboard and cut off the excess outside

Chapter 17 steps:

Lets wipe off the transferred ink

Step 18:

Erase slowly and do not break the lines

Step 19:

We prepared materials and tools from the very beginning. It can be seen that although the rubber stamp is just a simple rubber stamp structure after final production, it actually involves a lot of materials and tools. We need to prepare these materials and tools as indicated in the diagram. The next step is to make the rubber stamp according to the relevant manual steps indicated in the illustration, which mainly include transfer engraving and some modifications in details, and finally complete the design and production of a wonderful handmade rubber stamp.