Home > Handicrafts of life > Small craftsmanship

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

Industrial-style clothes hangers are straightforward and handsome. After mastering the basic principles, the hand-made method is not as difficult as imagined. The point is, the sense of accomplishment after completion is absolutely satisfying! In order to save space and expenses, there are no You can find simple clothes hangers for less than a thousand yuan. They are affordable, practical and beautiful, and easy to assemble. They are very suitable for small families, small apartments and renters. If simple clothes hangers could not only be assembled but also made by oneself, would it save more money?

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

First of all, you need to prepare black half-inch steel pipes, two steel pipes about 120 cm long as the side frames, one steel pipe about 91 cm long as the crossbar, and two steel pipes about 45 cm long as the base , and various connectors.

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

In the base part, a steel pipe of about 8 cm is used as the foot, and a T-shaped joint is used to connect the steel pipe of the base to ensure the stability of the clothes hanger and the storage board that supports the base.

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

Use 45-degree elbow joints to connect the side frames and crossbars. The protruding elbow can also be used as a hook to hang bags and other sundries.

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

If you want to have a storage platform, then the next step is to prepare the storage board and base. Before doing this, be sure to use a joint tube so that when one side of the base is fixed, the other side will loosen.

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

Find a medium-sized wooden board to use as a storage board. Hmm...two pieces will do, but remember to nail them tightly!

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

Then it is polished and oiled to ensure that the wood board is smooth and flat, and then applied with furniture polish to emphasize the wood grain. After completing these carpentry tasks, drill holes in the correct positions, pass the side frame through the wood holes and connect it to the base, and you're done!

Industrial Style Steel Pipe Clothes Hanger DIY Handmade Illustrated Tutorial

The cost of the entire set is US$71 (approximately RMB 440), but if you want to reduce the cost further, you can also replace the steel pipe with a plastic pipe and apply a layer of distressed paint for DIY experience and fun Still unabated!