Red wine bag made of crazy horse skin

Don’t drink alcohol I made a red wine bag because I like it so much. The main materials are: four and a half feet of crazy horse leather, four and a half feet of deerskin lining. Tools required: leather knife, twine, sewing wooden clamps, four-button buckle, four-button buckle installation Tools, cuttings, and yellow glue production steps:

The version I made with my own measuring tape, the bottom is missing in the photo, and the size is 12.5*9. Note that two pieces of the handle must be turned over and cut.

Missing here Don’t forget the bottom surface

First sew the cross lines in the middle of the front and back sides (the outer ring is not sewn first) and then glue the lining on (note that the lining should be roughly cut first, and then finely cut after gluing). Then all the surrounding pieces should be sewed separately. The beheading positions are all done well.

The handle part first Sew, install snap buttons (the two small holes are for threading and hanging when not in use) and then sew together with the front outer ring.

Sew the upper half circle where it is not attached first. (Pay attention to finding the right position)

You can add small partitions inside according to the size of your bottle opener.

Sew the surrounding sides and the bottom first

After sewing the bottom side, sew the surrounding sides together. You can sew directly without glue. When sewing to the middle end position, you can sew two turns outward for decoration

Finally, a red wine bag is completed. Tips: Pay attention to the order of stitches. Original text https://www.shougongke.com/course/ 485406.html

Red wine package