Vegetable basket graphic tutorial

Vegetable basket graphic tutorial, this vegetable basket is suitable for a variety of occasions and can be matched with a variety of styles. For chrome tanning, we recommend Mingjia edge ironing machine http://www.exiaodian.com/go/s33 Main materials: D buckle 2, foot nails 4, 5# zipper 1, 5# slider 1, U-shaped D buckle 1 , Four-sided snaps 2, Four-sided snaps 1, Invisible magnetic buckles 4 Tools required: hammer, awl, steel ruler, insert knife, wire cutters, double-sided tape/glue, edge oil, edge oil box, 3.38mm chopping knife , 0.45mm wax thread, G1.5 perm

This bag can just meet our current needs and evolved from the Hermès vegetable basket bag. The style is simple yet exquisite. It can be used for daily outings, banquets and other occasions. It is exquisite and practical. It is made of tumbled cowhide, which feels soft and delicate, giving us a good sense of comfort. The most important thing is that we can make it with our own hands, go through every step of the production process, watch it take shape bit by bit, and finally become a complete package. With this experience, the meaning becomes different. Whether it is given as a gift, used by yourself, or collected, it is a special existence. Capacity inside the bag: This bag can accommodate a long wallet, a notebook, a key bag, a lipstick, a bunch of keys, an umbrella, and a mobile phone without taking out the inner bag. The capacity is very large and practical.

Typesetting: Production Starting from typesetting, use computer software to draw a standard version of the version and print it out. Use a knife to cut along the shape of the version. Typesetting determines the amount of leather.

Crop: according Layout the layouts from large to small, and use a high-temperature pen (high-temperature pens are hot-melt and will not leave marks on the leather) to mark the position of each paper layout. During the drawing process, try to fix the paper pattern to prevent it from drifting.

The practicality of the cutting machine: the cutting method for small parts with high difficulty requirements is different from that of large parts. The small buckle leather part of the pocket, The leather part of the side ear buttons and the magnet part of the inner bag are cut manually by the knife mold (effect: precise, the arc is not easy to deform)

Small parts cutting: Cutting according to the quantity marked on the paper pattern. It is easier to use a cutting machine to cut. The advantage is that it is above the cutting table. The pressure part can be rotated at will, and the pressure level is rotated through the rotating disk

Edge scraping: After scraping, use a round knife scraping machine for fine processing, scraping processing of the sewing position, seam position 6.35mm, 2.5mm folding allowance, total width 9mm, scraping edge First, raise the presser foot, adjust the height and thickness downwards from the high place. When shoveling the edge, the leather is raised at an oblique angle. The total width of the presser foot does not move. Judge the thickness and the sewing position can be easily folded. Then shovel The thickness of the leather is judged based on the hardness of the leather.

Gluing the bag: Steps for handling the handle. After shoveling the leather, shovel the position of the joint. The lining is 0.4 leather dry paper. Glue the back of the leather. (Pay attention to the amount to prevent glue overflow.) On the leather Apply evenly to prevent glue bubbling. After gluing, leave it for a few minutes to wait for the glue to dry. Place the leather dryer paper along the edge of the leather (pull along the leather and align the edge of the leather)

Tape processing: aligned Then apply glue again on the dry leather paper, and assemble after the glue application is completed

Small parts assembly (magnetic Buckle): During the assembly process, the magnetic buckle should be wrapped with a layer of leather of the same color to make it more invisible. During the wrapping process, a layer of glue can be applied to the back of the leather and the magnetic buckle can be attached using a large wenge wood grinding stick. Press slowly and little by little along the shape of the magnetic buckle on the leather. After pressing, use a knife to trim and assemble

Ironing treatment: The side buckle strips are cut by hand and the stitching is cut. After cutting, the FN2-T ironing head is used for the next step. Before ironing, the ironing head can be treated with polishing paste. Polishing, cleaning treatment, cleaning the material on the perm to ensure stains Leather goods, after processing, you can test it on the scrap material, and then you can formally iron the leather edge.

Oil edge craftsmanship : Today we are going to process the oil edges of the leather. Use a perm to burr the leather edges before oiling them. During the process of perming the burrs, be careful not to use the perm temperature too high (light-colored leather tends to turn black). Note : The perm temperature is high, please be careful when adjusting the color of the edge oil after ironing the rough edges. Our leather material today is a lighter yellow, and you need to add white edge oil to the commonly used yellow for debugging. You can test colors on unused scraps of the same color. After the color test is completed, you can prepare the leather for oiling. When adding edge oil to the edge oil box, turn the roller (adjust the size) and note that edge oil can be added when the thickness of edge oil on the roller is feasible. It is best to operate with both hands when oiling the edge, so that the roller can rotate more easily, the leather is more stable and easy to operate, and the oiling is more even.

Composition: Now that the side panels and handles of this bag need to be separated and closed, the parts that need to be separated and combined are sewn together. Next, proceed to assembly. Use the high temperature ratio to mark the corner position. The package has obvious directionality. First, start from the middle alignment point, then align it with the corner point, and finally align it with the end point. After assembly, use flat-nose pliers to straighten and form the position. Clip one circle and assemble the other side in the same way.

Inner hemming: Apply glue to the hemming strip and dry it on the drying rack. While waiting for it to dry, you can apply another layer of glue in the same direction as the overall hemming position (along the (Brush glue on the edge of the shovel) Do not apply too much glue. After brushing the inner part, brush the outside. After the glue is dry, proceed to the edge wrapping operation. Use a bracket to fix the bag. Align the upper edge with the position of the shovel. Wrap a circle around the outside (don't stick it tightly first to facilitate modification). Fix the two ends of the inner circle first, and wrap along the straight line. After wrapping the straight line, wrap around the corner, and squeeze the corner toward the middle. , the wrinkles are even to make it more beautiful. After wrapping, use flat-nose pliers to clamp it.

Ironing line: After the hemming is completed, perform the ironing and cutting process. Use the adjustable edger to adjust the margin to 7mm. Adjust the temperature to level 7 and wait for 3 minutes. Right and left, you can iron the thread. It is the same as hemming. Iron the straight line first and then the corners. After the edge is ironed, you can cut it. When cutting, align the cutting edge and do not use too much force when pulling out.

Vegetable basket