The starry sky card holder previously launched by the author @polar dot handmade has been loved by many leather friends, and I feel very pleased. This time I will make some extensions to this starry sky series. I plan to let me help with some commonly used objects. The third part of this extension One is a small satchel. It’s still the old rule, look at the finished product renderings first.
The production process begins below : First of all, before making it, let us first understand the overall structure of the bag, that is, what parts it is composed of. Once the idea is clear, the next production can be logical. Main components: cover, front panel, back panel, back pocket, side panels, inner pocket. Hardware part: a set of magnetic buckles, two horseshoe buckles, and a metal chain. Purchase drawings http://www.exiaodian.com/go/23 1. Cover part
1. First, take a look at the layout display used in this bag
2. First use the pre-larged pattern to cut two pieces of top crust and one top crust.
3. Follow Cut out the stars and moon on the surface of the pattern. Tips: Some friends may ask how to cut this irregular pattern without a die or punch. In fact, it is very simple. Press the pattern directly on the leather.Then use a sharp utility knife to cut directly according to the pattern.
4. This It’s cut starry sky dough
< /p>5. Cut the bran paper used for the middle cushion core
6. Glue the bran paper and base paper separately and prepare to paste
7. Paste the bran paper and the base paper
8. Cut an orange-yellow reinforcement patch to use as stars and Moon
9. Paste it on the bran paper that has just been pasted. It is recommended to paste two layers so that the color is more pure and the bottom color will not show through
10. Glue the orange part and the dough part separately and prepare to attach them
11. Align the stickers so that the stars and moon appear
12. Cut the pre-made dough according to the precise pattern
13. Follow the version Install the magnetic buckle
< /p>14. After the magnetic buckle is installed, remember to stick a piece of reinforcement on the metal sheet to prevent scratching the leather
25. Cut a piece of wavy cover on one side according to the pre-larged pattern
16. Draw decorative lines on the wavy block
17. Then add oil to the wavy part
18. Glue the edges of the waves and the cover
19. Align the wave shield with the face cover Glue
20. Cut off the excess parts
< /p>21. The face cover is basically worn, and the rest is to cut and oil the seams
22. Tips for chopping: press the pattern directly and then draw the marking line. Chopping quickly against the pattern, and then sew. The upper cover part is completed without any oil on the sides. 2. Making the front part
23. Follow the instructions Cut the upper crust, bran paper and bottom crust separately in the large format
24. Glue the dough and bran to prepare for attachment
25. Then install the magnetic buckle according to the pattern
26. Similarly, remember to paste the metal sheet on the back with reinforcing cloth
27. Attach the bottom skin to the steel The good skins are glued separately and ready to be pasted
28. After pasting, cut according to the tailoring pattern
29. Cut and stitch the upper edge according to the pattern, and then oil the upper edge to this point, and the front part is completed. 3. The entire back part, including the production of the inner and outer bags. ①First make the inner bag part
30. Cut the inner bag skin according to the pattern
31. Thin the surrounding edges
32. Attach the reinforcement cloth
33. Glue the edges and prepare for folding
34. The effect after folding
35. Cut and sew the upper edge of the inner bag
36. Align the previously cut bran with the base leather glue
37. Mark the position of the inner bag according to the pattern
38. Paste the inner bag at the marked position< p style="text-align: center;">
39. Beat and chop The stitching and inner pocket are done ② Then comes the back pocket
40. Take a slightly larger piece of outer skin and a piece of reinforcing fabric, first align them, and then cut them according to the pre-large format
41. Outer bag tailoring
42. Cut out the outer bag and inner baffle according to the pattern Film
43. Draw the sticking position on the back of the outer bag according to the pattern to facilitate glue application and avoid glue overflow
44. Glue the baffle and the marking on the back of the outer bag
45. Paste the baffles together, and then tailor the upper edge according to the pattern
46. Cut according to the pattern
47. Sutures
48. The oil outer bag part on the edge has come to an end for now ③ Next is the main part of the back panel
49. Take out the inner bag that has just been sewn and attach it to the back Upper reinforcement cloth
50. Take out the back cover and mark the glued part on the reinforcing cloth
51. Glue the cut rear panel and the rear panel mark position
52. Posting
53. Mark the part to be glued on the back panel according to the pattern, and then glue it
54. Then paste the back pocket< p style="text-align: center;">
55. Follow After the pattern is finely cut, the rear part is completed. Fourth, the production of the side part
56. Cut out the top and bottom fabrics according to the pre-large pattern
57. Cut according to the pattern
58. Carry out the edges marked on the picture. Oil edge
59. Overlap the side film and the side in this way, and then follow the pattern Type-cut stitching 5. Paste stitching on the side panels, front panel and back panel. Finally, the combination of the cover part and the bag body
60. Smooth the upper part of the bag body than the inner leather to facilitate gluing
61. Next, cut the upper part of the suture. Oil, I won’t show it here
62. Drill holes in the cover according to the pattern
63. Install the horseshoe buckle and then the shoulder strap chain. The above is the entire production process of the Starry Sky Satchel
Small shoulder bag
