The second most detailed oiling tutorial in the history of handmade leather goods

How to apply edge oil well has always been an eternal problem in handmade leather goods topic. In this sharing, I will tell you about the method of oiling leather goods. I will try to explain it in as much detail as possible. It will take a long time. You can pay attention to the progress bar at the top of the screen to watch the video. I hope that after reading this, everyone will no longer think that oiling is a problem. Thin edge oil is more capable and more durable, while thick edge oil is more rounded and plump. When we choose edge oil, we can choose according to our own aesthetic preferences and requirements. Watch the video

http ://v.qq.com/x/page/x0962g80wdz.html Small tips: Friends who want to directly understand the oil technique above can directly scroll to 01:50 and start watching. About leveling 1. You can first use a paring knife or utility knife to cut off the protruding part along the edge of the short side. We commonly call it leveling, this is very important! ! It is easier to get twice the result with half the effort when polishing the leather edge later. 2. If there are leather fibers on the edges of the leather that cause the edges to fluff, you can use an edge iron or a soldering iron to slightly iron the edges to make them smooth. Leather fibers are mainly protein, and the fine fibers will be burned when ironed at high temperatures. Make the edges even. About the top oil: 1. First scrape off the edge oil. The awl should be at 45 degrees to the edge of the leather, all the way forward and down. Be sure not to go in the opposite direction, otherwise the edge oil will be scraped onto the skin.

The principle is leather Use the chamfer on the edge to retain the edge oil. 2. When the edge oil reaches a relatively smooth surface with no depressions, you can put it aside and wait for it to dry. M634 is a quick-drying edge oil, so the waiting time will not be long. If you have a hot air blower, you can also blow it against the hot air blower.

3. After the first pass of edge oil dries, use sandpaper to polish, paying attention to the smoothness. The editor will share a little tip with you: polished areas and unpolished areas The color of the places is a little different, you can judge from this point whether the polishing is in place.

4.