How to remove zipper teeth? Tooth removal

Metal zippers are used in many leather goods designs, and they are available on the market The length of the zipper usually cannot fully meet our requirements. At this time, we can only buy a longer zipper, remove the excess zipper teeth, and then install the upper and lower stops (to install the upper and lower stops, just use needle-nose pliers to clamp them , then tap it with a hammer, it is very simple. However, it should be noted that it is best to use toothless needle-nose pliers. This kind of needle-nose pliers is smooth and has no horizontal lines and will not scratch the upper and lower ends). Speaking of removing the zipper teeth, some people like to use pliers to hold the zipper teeth and pull them out hard. This will damage the tape and is not recommended. In fact, we only need a pair of diagonal pliers to find the right position to cut off the zipper teeth, and the teeth will fall off naturally without damaging the tape.

The last tooth in the picture above, The position of the white line

Reference video https://v.qq.com/x/page/v30141nnq7f.html Purchase diagonal nose pliers http://www.exiaodian.com/go/393 So the most important thing is to find the right cutting position. Try it a few times and it will be easy once you get the hang of it.

Zipper