Hi, Tianjin Lao Zhang, @Felonant is my Weibo. When I make a new one, I will post pictures in it. Because I always lose my cell phone and my computer always breaks, so Weibo is more reliable. One day I met a customer who was very particular and wanted to order a small cross-body bag for men to carry or carry at work. Then the problem came. Generally, soft cross-body bags do not have handles. Fortunately, I remembered to take a photo this time, and I hope everyone can take a look at it and it will be helpful. I asked about the budget. The customer was very generous, so I planned to make a good one for him. I drew a picture as follows
The customer thought it was OK, so he paid the deposit and left. I started looking for suitable parts and cut a few more strips to make handles:< p style="text-align: center;">
Many introductions before Those who make handles should stop gossiping. In order to check the quality, I planned to use a copper horseshoe buckle. The one I bought online seems to be called Aimet, which is said to be foreign. Anyway, it looks okay. I took 3 vegetable tanned strips and glued them together to make the core. The two ends were cut diagonally. Prepare the round slices:
The specific number of layers depends on personal preference, and then make a circle:
If it looks ok, then make the core below:
Then make a circle:
If you are not good at taking photos, lets just take a look... Just cut two long enough strips and prepare to paste them. ：
Scientific name Pressure scraper, this thing is expensive or cheap. Anyway, I am quite stingy. This one comes as a gift when I buy other ones. It is actually the same. It is better to get a piece of 1000 grit sandpaper and grind it yourself. Use it to shape your body. , by the way, press the mark:
The bottom of the handle also has the same meaning. Note that the higher the core cushion, the more incision is needed, otherwise it will deform:
Cut it into the desired shape, then make two small reinforced pieces, and smash the beheaded eyes by the way. Pay attention to counting. It’s broken:
That’s it. We need to make two connectors. We need to build the core first:
Look at it from the side, this means:
Cut two pieces of dough of suitable shape:
Glue it and shape it:
It’s all one step. The specific size depends on how big a horseshoe buckle is used. Don’t forget to make an edge to avoid deformation: < p style="text-align: center;">
Cut as you want Shape:
Smash the eyes and seal the edges, grind them where you need to:
The upper and lower pieces are glued together. It is a bit annoying to have to attach the horseshoe buckle. I sewed the thread and bent it into the desired arc:
Then decorative lines and edge sealing, there is nothing to say:
Screw on the two connected bases, and the handle is finished:
Look at it from the side, this means, But in the end, I have to polish the color of the horseshoe buckle, so for now:
The design feeling came and I was ready to start making the straps. In order to be worthy of the price paid by the customer, I felt that the straps could not be sewn together in two flat pieces, so I thought of something Try a more complicated structure, I think the effect will be okay. First make the small loops that connect the main body of the strap. Don’t be lazy when it’s time to do the drumming:
Cut it into the desired shape, and smash the eyes by the way. I use the white steel diamond chop. , it’s actually quite good and economical. I’ll give you a chance to explain the details:
Grind where you need to:
These two small tabs are connected to the main body of the strap. I need to make a small connector for them. I think the effect is okay:
Putting one piece together means:
Then make the small loop connecting the bag body. Don't be lazy when its time to drum up:
You have to make two clothes for him The belt is too small to wear:
The sense of design is here again. The copper hooks and hooks used for these two bags have to be made into two bases, otherwise the copper parts must be polished to blacken the bags, and they can echo the effect of the two above. Thats it:
Take a look at this structure:
One piece probably means this:
There seems to be nothing wrong so far, sew it up:
The design sense is here again, ready to do it The main body of the strap. If you want the strap to be detailed, you must first make an anti-slip strip. It will not slip down easily on the shoulders. Just draw it upwards. Anyway, I don’t want to draw a square shape, but it is best to draw a small round shape on the head. Paper type:
Look Now that I have the size, I cut a vegetable tanned strip and put it on the pad. The anti-slip strip must be higher than the strap, otherwise it will be meaningless. Let’s add a sheep strip.
