Handmade scroll backpack

Author WX: Facie0624 (finished product for sale, please contact if interested) It is not very complicated, but it is time-consuming and the workload is huge. I don’t want to deal with big packages in the near future.

Main materials: Crazy horse leather is about 1.8, which is a bit soft, and is prepared to be about 15 feet long. Required tools: Daily tools, steps for punching holes in the bag:

Unloading. The materials used are about ten feet, so it is recommended to prepare more than 15 feet to avoid mistakes and leave some room to start over.

Two pieces on the back Sew it up, and sew the two corner parts as well.

Shoulder strap pair Sewing is good. If there is thick material, just use a single layer, otherwise you will vomit blood during the sewing.

Basically the back Finish. It is recommended that the rivets be drilled before chopping. There are too many parts and the shoulder pads are so thick that glue alone cannot stick to them. The chopping is easy to shift, so it is better to fix it with rivets first.

The monks head is installed on the small piece of the front bag, glued on and chopped.

Sew.

Also on the main body Same.

Rivets on the back Play well. I didn’t like the serious round head, so I had my eyelids done with my hands.

Main Top Four Fastened and assembled.

Front pocket bag Sew cover on.

Front pocket edge Drill round holes in the corners.

Inseam well flip over.

Sew on the main body.

Try it.

Side strip three Sew the pieces and then punch round holes. The places where there are seams at both ends need to be punched together. Use a diamond chopper. I forgot to take a picture. You will understand it later.

The main body is rounded There are also pre-punched holes on both sides of the top.

It is recommended not to rush If so, attack it several times. The project is huge and one of the punches will be scrapped. The row punch is difficult to penetrate and the shock will make your shoulders hurt.

Back strap Install the lower part.

Part of the strap.

When opening seams, the thread must be tightened, otherwise it will be easily exposed when turning over the bag, so if you wear finger cots, be sure to wear them.

Half done.

The other half.

Strength works wonders.

The four corners of the bag mouth, that is, where holes need to be pre-punched, sew OK.

Basic Completed.

Roll up the bag.

Back.

Button on two Destiny takes shape.

Backpack