Crazy horse leather hunter bag making

It is not large and is very convenient for daily travel. Drawing https://item.taobao.com/item.htm?id=564543172923 Main material: Crazy horse leather 2.0mm, about 5 feet, try to be softer. Tools required: Normally used tools. Production steps:

Not much to say about cutting materials.

Mouth stickers The strips are glued on and then lines are drawn.

Behead, Remember to leave a hole on each side.

Sutures.

Punch holes where necessary.

The body of the bag is chopped, because it is turned over, so use round chop.

A small compartment bag is added inside.

Beheaded and added two rivets.

Sew.

What the back looks like.

The two corners of the front skin of the main body are first sutured from the reverse side.

Good translation.

Integral reverse stitching , and then dig through the bag. Vigorously miracle. I forgot to take a step-by-step photo here. I only remembered it after turning the bag. It is divided into two steps: sewing the wrong side → turning the bag to the front.

Make bag straps .

Install side ears and button.

Packed with straps Hardware.

Inside of the finished product.

Finished product. TipsShi: It’s not difficult, so the process is relatively simple. Just rummage through the bag a little bit, and it will work wonders with great force. Bag straps can be bought ready-made. 2mm leather straps are quite tiring to open, they are stretchable and the longer they are cut, the longer they get.

Crazy horsehide hunter bag