Super simple leather bag

Author: Tofu_Katers Original text https://www.shougongke.com/course/484371.html It is the first time to design the pattern and dyeing by myself. Because of the use of gold bars, the process becomes simple and the effect is very good ~ Main materials: Plants Tanned leather 2mm*25cm*30cm, gold bar 19cm, tools required for screws: ruler, utility knife/cutting knife, dyeing tools (dye, cotton cloth, dye resist, gloves). You can also buy dyed leather directly. Surface treatment (mink oil, bed surface agent), spacing gauge, diamond chopper, needle and thread, leather special glue, screwdriver

Dyeing, prepare materials

Apply a layer of mink oil. It is said that the leather will be dyed more evenly when it is wet (you can also wet it with water, but the disadvantage is that it is easy leaving dark spots)

< /p>I tried a makeup sponge... I wrapped it in cotton cloth and made it into a "sunny doll" shape to apply oil more evenly

Dilute the alcohol dye and try dyeing it on a small piece of leather first

Here you go~~~ The dyeing effect is better with a makeup sponge, although it is still not very uniform. Now, I still need to study, practice and try more

After dyeing, dry in the shade for one day , then apply dye resist or brightener, and apply bed agent on the back (the color on the front has gone to the back after complaining)

Cut the required shape, two sides, and a whole piece as the front and back base

Is this blue okay if you look closely?

Strike Cut

Sew the sides And the front and back sides

Generally speaking, the two small corners on the side will protrude slightly, which can be trimmed off with scissors and then smoothed with sandpaper

Finally install the gold bars and you're done!

It can be made into a small satchel (two small holes are punched on the side for chains) or a pencil case

It is easy to see dyeing and suture bugs from this angle. I can only say that we are making progress slowly~

Kou Jin Bao